Adding LED's to ES1

Discussion and support for Expert Sleepers' Silent Way software and hardware.

Moderators: Kent, os

Post Reply
User avatar
JP
Ultra Wiggler
Posts: 928
Joined: Thu Jan 07, 2010 5:07 pm
Location: NJ

Adding LED's to ES1

Post by JP » Wed Sep 01, 2010 2:50 pm

It was mentioned a while ago that it wouldn't be overly complex to add some LED's to the ES1 so that traffic results in flickering lights.

Has anyone done this?

Os, don't suppose you have a spare minute or two to sketch up a quick diagram, I have tons of spare LED's I could use for this.

User avatar
os
Super Deluxe Wiggler
Posts: 13618
Joined: Tue Jun 30, 2009 6:55 am
Location: UK
Contact:

Post by os » Thu Sep 02, 2010 2:37 am

I'm actually in the middle of doing this. In fact it would be done, except that I used blue LEDs, which was fail because they don't show up at all through the orange panel.

I'll post a full how-to when I'm done.

User avatar
JP
Ultra Wiggler
Posts: 928
Joined: Thu Jan 07, 2010 5:07 pm
Location: NJ

Post by JP » Thu Sep 02, 2010 8:26 am

/me runs off to make sure I don't only have blue leds

Post Reply

Return to “Expert Sleepers”