MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

4U ears for vector rails? (Mounting a Buchla 208r)
MUFF WIGGLER Forum Index -> Music Tech DIY  
Author 4U ears for vector rails? (Mounting a Buchla 208r)
diophantine
Are there any 4U ears available for attaching to vector rails, that would potentially work with a Buchla 208r?

I built my Buchla 208r (rev 1) five years ago, and it is still sitting connected to the bench PSU. I've tried to bend/cut a Bud Boat to fit it, but that's looking fugly. I also don't think my Meanwell PSU (or other potential power options) will nicely fit in the boat along with the 208r, not to mention installing an AC inlet, etc.

Since (1) I don't have a 218, (2) program cards don't work on the 208r rev 1, and (3) I'm tall, I'm fine with having the 208 "way up there" in a 4U spot in my studio (i.e. above my Synthasystem and Kobol). It would also take up less room that way. And I've done plenty of rear rack rails with PSUs mounted on them so I am totally comfortable with that.
MUFF WIGGLER Forum Index -> Music Tech DIY  
Page 1 of 1
Powered by phpBB © phpBB Group