2hp - DC, Sine, Bell & Grain

Cwejman, Livewire, TipTop Audio, Doepfer etc... Get your euro on!

Moderators: lisa, luketeaford, Kent, Joe.

Post Reply
User avatar
twohp
Learning to Wiggle
Posts: 20
Joined: Fri Apr 14, 2017 11:59 am
Contact:

2hp - DC, Sine, Bell & Grain

Post by twohp » Thu Jan 24, 2019 12:43 pm

Hello fellow wigglers!

We are incredibly excited to announce 4 new products.

DC - DC offset generator
ETA: February
MSRP: $89

Bell - Physical modeling voice
ETA: March
MSRP: $149

Grain - Granular processor
ETA: April
MSRP: $149

Sine - Sine wave VCO with sub output and wavefolding
ETA: May
MSRP: $149


Image
Image
Image

Demo videos will be available very soon!

User avatar
shoottofill
Wiggling with Experience
Posts: 254
Joined: Mon Oct 17, 2016 1:38 pm
Location: South Omaha
Contact:

Post by shoottofill » Thu Jan 24, 2019 1:02 pm

Damn. Can't wait to hear sine and grain.

Also, "Sine and Grain" sounds like a good name for a synth themed whiskey bar.

namon
Common Wiggler
Posts: 99
Joined: Sat Jun 16, 2012 11:39 pm
Location: North bay

Post by namon » Thu Jan 24, 2019 1:09 pm

I would also like to go to this whiskey bar.

User avatar
shoottofill
Wiggling with Experience
Posts: 254
Joined: Mon Oct 17, 2016 1:38 pm
Location: South Omaha
Contact:

Post by shoottofill » Thu Jan 24, 2019 1:11 pm

namon wrote:I would also like to go to this whiskey bar.
The ven diagram of alcoholic and synthesist may be small, but it will be interesting.

User avatar
Zymos
Super Deluxe Wiggler
Posts: 2516
Joined: Sat Jul 18, 2015 1:14 pm
Location: ABQ,NM

Re: 2hp - DC, Sine, Bell & Grain

Post by Zymos » Thu Jan 24, 2019 1:18 pm

You were missing a bracket for the link to the picture of offset generator, fixed it for ya!

twohp wrote:Hello fellow wigglers!

We are incredibly excited to announce 4 new products.

DC - DC offset generator
ETA: February
MSRP: $89

Bell - Physical modeling voice
ETA: March
MSRP: $149

Grain - Granular processor
ETA: April
MSRP: $149

Sine - Sine wave VCO with sub output and wavefolding
ETA: May
MSRP: $149


Image
Image
Image
Image

Demo videos will be available very soon!

User avatar
shoottofill
Wiggling with Experience
Posts: 254
Joined: Mon Oct 17, 2016 1:38 pm
Location: South Omaha
Contact:

Post by shoottofill » Thu Jan 24, 2019 2:08 pm

First demos

User avatar
MindMachine
weekend warrior
Posts: 6844
Joined: Sun Aug 02, 2009 1:45 am
Location: Santa Susana Field Lab

Post by MindMachine » Thu Jan 24, 2019 3:57 pm

shoottofill wrote:
namon wrote:I would also like to go to this whiskey bar.
The ven diagram of alcoholic and synthesist may be small, but it will be interesting.
You rang?

Or was that the promising new 2HP Bells module?

User avatar
shoottofill
Wiggling with Experience
Posts: 254
Joined: Mon Oct 17, 2016 1:38 pm
Location: South Omaha
Contact:

Post by shoottofill » Thu Jan 24, 2019 3:59 pm

MindMachine wrote:
shoottofill wrote:
namon wrote:I would also like to go to this whiskey bar.
The ven diagram of alcoholic and synthesist may be small, but it will be interesting.
You rang?

Or was that the promising new 2HP Bells module?
*hic* I patch better when I've had a few

User avatar
MindMachine
weekend warrior
Posts: 6844
Joined: Sun Aug 02, 2009 1:45 am
Location: Santa Susana Field Lab

Post by MindMachine » Thu Jan 24, 2019 4:03 pm

^ well I sound better after a :guinness: that is for sure.

… also that DC module is one I was hoping that they would come out with.

All four of these look very ownable and usable to me. Can't wait to hear Bell, Sine and Grain.

Now they just need that Crossfader w/ built in vc lfo. :mrgreen:

User avatar
shoottofill
Wiggling with Experience
Posts: 254
Joined: Mon Oct 17, 2016 1:38 pm
Location: South Omaha
Contact:

Post by shoottofill » Thu Jan 24, 2019 4:06 pm

MindMachine wrote:^ well I sound better after a :guinness: that is for sure.

… also that DC module is one I was hoping that they would come out with.

All four of these look very ownable and usable to me. Can't wait to hear Bell, Sine and Grain.

Now they just need that Crossfader w/ built in vc lfo. :mrgreen:

^^^^I posted the first demo i've seen. Bell sounded really good.

User avatar
shoottofill
Wiggling with Experience
Posts: 254
Joined: Mon Oct 17, 2016 1:38 pm
Location: South Omaha
Contact:

Post by shoottofill » Fri Jan 25, 2019 8:52 am

[video][/video]

a much better video preview

I still wish he would do half wet/dry and full dense on grain just once.

ckwjr
Common Wiggler
Posts: 250
Joined: Mon Dec 17, 2018 10:30 am

Post by ckwjr » Thu Jun 06, 2019 2:15 pm

The various model sounds of Bell are really fantastic:

Pure Bell
Pure Vibraphone
Harmonic Vibraphone
Hard Marimba
Soft Marimba
Tibetan Bowl
Wine Glass
Redwood Plate

hard to choose a favorite. It's a very different experience from Pluck where it's all about finding the right combination of damp/decay.

User avatar
MindMachine
weekend warrior
Posts: 6844
Joined: Sun Aug 02, 2009 1:45 am
Location: Santa Susana Field Lab

Post by MindMachine » Sat Jun 08, 2019 8:43 pm

When is Grain gonna land?????
FS: Pedals and Euro modules, Delta Labs
viewtopic.php?f=74&t=233636&p=3287718&h ... e#p3287718
WTT: my Mangler for your Rumour

The Grump
Veteran Wiggler
Posts: 533
Joined: Fri Apr 15, 2016 6:17 pm

Post by The Grump » Thu Jun 13, 2019 12:26 am

Looking forward to grain as well, but in the mean time, brother, keep kickin much ass!! Big ups for making affordable compact powerful and useful tools!

User avatar
shoottofill
Wiggling with Experience
Posts: 254
Joined: Mon Oct 17, 2016 1:38 pm
Location: South Omaha
Contact:

Post by shoottofill » Thu Jun 13, 2019 3:49 pm

still waiting for a good demo of Belle. want to know how the polyphony sounds (if it's like pluck)

User avatar
MindMachine
weekend warrior
Posts: 6844
Joined: Sun Aug 02, 2009 1:45 am
Location: Santa Susana Field Lab

Post by MindMachine » Fri Jul 12, 2019 3:00 pm

Heard from 2HP today that Grain will ship in September. Been a little impatient for this guy.
FS: Pedals and Euro modules, Delta Labs
viewtopic.php?f=74&t=233636&p=3287718&h ... e#p3287718
WTT: my Mangler for your Rumour

User avatar
shoottofill
Wiggling with Experience
Posts: 254
Joined: Mon Oct 17, 2016 1:38 pm
Location: South Omaha
Contact:

Post by shoottofill » Fri Jul 12, 2019 6:05 pm

MindMachine wrote:Heard from 2HP today that Grain will ship in September. Been a little impatient for this guy.
was curious about that.

adaris
Wiggling with Experience
Posts: 398
Joined: Mon Dec 03, 2018 12:49 pm
Location: Maryland

Post by adaris » Wed Sep 11, 2019 3:29 pm

Anyone heard any updates on the Grain? I'm assuming the V/OCT input is relative to the pitch of the input signal, so 1V would raise the pitch by 1 octave if the Freq knob is centered, is that right?

User avatar
MvK
Wiggling with Experience
Posts: 441
Joined: Mon Nov 24, 2014 8:46 am
Location: Berlin

Post by MvK » Thu Sep 12, 2019 8:03 am

I got the sine the day it became available at schneidersladen. Its great as a modulator for tzFM. Also the sub out with the blend is nice especially as a modulator for FilterFM.

User avatar
shoottofill
Wiggling with Experience
Posts: 254
Joined: Mon Oct 17, 2016 1:38 pm
Location: South Omaha
Contact:

Post by shoottofill » Thu Sep 12, 2019 8:35 am

MvK wrote:I got the sine the day it became available at schneidersladen. Its great as a modulator for tzFM. Also the sub out with the blend is nice especially as a modulator for FilterFM.
really hope someone does a good demo on that soon.

User avatar
evs
Super Deluxe Wiggler
Posts: 1320
Joined: Mon Apr 20, 2009 1:49 am
Location: Cologne

Post by evs » Fri Sep 13, 2019 3:08 am

how to fine tune the sine osc?
does the one knob go all the octaves up and down?

User avatar
MvK
Wiggling with Experience
Posts: 441
Joined: Mon Nov 24, 2014 8:46 am
Location: Berlin

Post by MvK » Fri Sep 13, 2019 5:42 am

evs wrote:how to fine tune the sine osc?
does the one knob go all the octaves up and down?
it does. I'm not using a reference frequency like a=440Hz. So I set the 2hp Sine however it sounds good, and tune the other oscs after it. But adding an offset to the V/oct CV would also work.

Post Reply

Return to “Eurorack Modules”