MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

FH-2 to ER-301 I2C?
MUFF WIGGLER Forum Index -> Expert Sleepers  
Author FH-2 to ER-301 I2C?
bobbcorr
Hi Os,

I've been following this thread on the Orthogonal Devices discussion forum with interest, and it seems that the FH-2 might also be able to connect with the ER-301 via I2C perhaps via a break-out? I'm curious what your thoughts are on this.

Thanks for your time,

bob
os
You mean via MIDI, or actually via the native I2C protocol (which I'm not at all familiar with at this point)?
bobbcorr
Via I2C using the FH-2 as the MIDI input device. So the chain would be:

MIDI instrument/controller —> FH-2 —> ER-301 via “some magic”
os
Possibly. It would require repurposing the FH-2's expansion output header.
auxren
Ohhhh, following this.
MUFF WIGGLER Forum Index -> Expert Sleepers  
Page 1 of 1
Powered by phpBB © phpBB Group