MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Request - send midi clock from USB host (Kenton?) to OP-Z
MUFF WIGGLER Forum Index -> General Gear  
Author Request - send midi clock from USB host (Kenton?) to OP-Z
Tonemod
Does anyone have an OP-Z and a usb midi host? A Kenton or equivalent would do.

I'm hosting the OP-Z on an Expert Sleepers FH-2 and cannot get clock to send directly from the FH-2 to OP-Z. Here's a few test cases:

Bitwig (master clock) -> FH-2 USB C -> OP-Z (Hosted on FH-2 USB A) - Good
FH-2 (master clock) -> Elektron Model:Samples (Hosted on FH-2 USB A) - Good
FH-2 (master clock) -> OP-Z (Hosted on FH-2 USB A) - No clock received on OP-Z

If anyone has a USB host and can send midi clock from a hardware box to the OP-Z it may help us get to the bottom of what's going on.

help
Power Mic 3K
Hopefully this info helps:

Electribe EMX-1 MIDI -> Kenton MIDI USB Host MKII USB port -> OP-Z USB works for master clock, start/stop, and CC without any configuring beyond having a common channel.

Good luck!
MUFF WIGGLER Forum Index -> General Gear  
Page 1 of 1
Powered by phpBB © phpBB Group