MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Making Rogan encoder knobs
MUFF WIGGLER Forum Index -> Buchla, EMS & Serge  
Author Making Rogan encoder knobs
mutierend
Rogan makes encoders in the RB style but nobody seems to carry them, and I don't need 1000+. I know some folks have removed the skirt on a small skirted knob. (An example is the encoder on the 1979 DAO.)

What's the best way to do that?
tobb
hold the knob with its skirt in a machine vise,and cut with a saw.

Saw not to close to the knob to avoid damaging it.

Once skirt is removed cut away the remaining parts with a cutter knife until its flat.

smile
MUFF WIGGLER Forum Index -> Buchla, EMS & Serge  
Page 1 of 1
Powered by phpBB © phpBB Group