Disting Mk3 no output

Discussion and support for Expert Sleepers' Silent Way software and hardware.

Moderators: Kent, os

Post Reply
C80
Learning to Wiggle
Posts: 5
Joined: Mon Jul 29, 2019 3:36 am
Location: South UK

Disting Mk3 no output

Post by C80 » Wed Jul 31, 2019 4:20 am

Hi, I have recently picked up a used Disting mk3 and I'm having a bunch of issues with it. I have run a firmware update and I believe it is successfully running the latest firmware, but I am not getting any output out of A. Before the firmware update I couldn't get any output from ieither A or B, but now the reverbs, wavefolders etc seem to work, but only ouputting sound from B- in some cases this seems to be what A is supposed to be (eg: a blended wet/dry reverb signal). None of the oscillators or random voltage generators are producing anything. I get the trigger from the random voltages, but no cv from A.
Anyone come across this before and have any ideas what to do? Many thanks!

C80
Learning to Wiggle
Posts: 5
Joined: Mon Jul 29, 2019 3:36 am
Location: South UK

Post by C80 » Sun Aug 04, 2019 3:54 pm

Hi Os, do you have any ideas about the above issue?
Thanks

User avatar
os
Super Deluxe Wiggler
Posts: 13582
Joined: Tue Jun 30, 2009 6:55 am
Location: UK
Contact:

Post by os » Tue Aug 13, 2019 6:35 am

Seems like this might be a double post? Did I not already answer this?

Post Reply

Return to “Expert Sleepers”