MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

3U TO 1U EURORACK ADAPTER
MUFF WIGGLER Forum Index -> Eurorack Modules  
Author 3U TO 1U EURORACK ADAPTER
MatrixModulator
Please email me directly, don't use the forum private message i hate it.
matrixmodulator@gmail.com

https://www.tips.modularparts.net/3u-to-1u-eurorack-adapter/

15$ each + shipping

2 Formats available:
Pulplogic 1u size can fit up to 6hp of 3u modules
Intellijel 1u size can fit up to 4hp of 3u modules
Both formats are 26hp wide

3u module(s) mounts inside the adapter using the usual m3 x 6mm eurorack screws and a m3 nut to fix modules inside them. I include 4 screws and 4 nuts for each adapter you buy.

Shipped as a letter in small padded enveloppe, most of the time 5$ to Canada or USA for 1 or 2 pcs but more than this i need to use tracking at about 15$. I can also ship to international. I’m not responsible if package gets lost without tracking.

Prices are USD currency. Shipped from Canada
Pm me with the format you want, how many and your complete address please.
Thanks!


On modulargrid.net :

https://www.modulargrid.net/e/other-unknown-3u-to-1u-adapter-pulp-logi c

https://www.modulargrid.net/e/other-unknown-3u-to-1u-adapter-intellije l













versipellis
Finally someone has gone and done it! You sir are a SlayerBadger!
DSC
Very nice indeed. If there was any question to the advantages of the PL format, there is one obvious reason thumbs up
Foghorn
I would like to see a 1U to 3U adapter.
Maybe an 8 or 10HP wide 3U panel that fit some 1U PL tiles.

Foghorn


So I don't have to keep doing this.


Arneb
MatrixModulator wrote:
[snip]

I suppose the PL format ones do not have any power adaptation functionality, i.e. the converted module still requires a normal Eurorack 16-pin connector?

Foghorn wrote:
I would like to see a 1U to 3U adapter.
Maybe an 8 or 10HP wide 3U panel that fit some 1U PL tiles.

Those exist, courtesy of PulpLogic or Syinsi. Note that you'll need something like this to deal with PL tiles' non-Eurorack power supplies.
MatrixModulator
DSC wrote:
Very nice indeed. If there was any question to the advantages of the PL format, there is one obvious reason thumbs up


From what i understand both intellijel and pulologic follow the 1u size it's just that pulplogic doesnt have the lip. There was a thread explaining it on this forum.
MatrixModulator
Foghorn wrote:
I would like to see a 1U to 3U adapter.
Maybe an 8 or 10HP wide 3U panel that fit some 1U PL tiles.

Foghorn


So I don't have to keep doing this.




Yeah they are already out there, that's why i didnt make them.
MatrixModulator
Arneb wrote:
MatrixModulator wrote:
[snip]

I suppose the PL format ones do not have any power adaptation functionality, i.e. the converted module still requires a normal Eurorack 16-pin connector?

Foghorn wrote:
I would like to see a 1U to 3U adapter.
Maybe an 8 or 10HP wide 3U panel that fit some 1U PL tiles.

Those exist, courtesy of PulpLogic or Syinsi. Note that you'll need something like this to deal with PL tiles' non-Eurorack power supplies.


I'm just selling/made the adapters you see on the picture.
Buttons ARE toys
Niiiiiice. I've been wanting one of these for my uScale v1 for a while now! applause
Foghorn
Arneb wrote:

I suppose the PL format ones do not have any power adaptation functionality, i.e. the converted module still requires a normal Eurorack 16-pin connector?
Note that you'll need something like this to deal with PL tiles' non-Eurorack power supplies.


Yeah, I got into tiles 3 years ago.
Bought 41 of them, mostly 6HP but 9 of them are 12HP.
I have maybe 8 euro to tile power tails. (1 euro power to 9 tiles)

Thanks for the 3U to 1U adapter heads up.

Foghorn

Ha..21 of them are att-off (attenuator-offset) 6HP tiles
Seaweed Sound
I'd like to offer some feedback and hopefully you don't take offense: the "ModularParts.net" logo text is a deal breaker for me.

Can the panel be reversed or is there text on the back side? hmmm.....
MatrixModulator
Buttons ARE toys wrote:
Niiiiiice. I've been wanting one of these for my uScale v1 for a while now! applause


Nice, don't hesitate to email me matrixmodulator@gmail.com
MatrixModulator
Seaweed Sound wrote:
I'd like to offer some feedback and hopefully you don't take offense: the "ModularParts.net" logo text is a deal breaker for me.

Can the panel be reversed or is there text on the back side? hmmm.....


I can understand your point.
You can put black tape on it or you email me and i'd be happy to make a special order for you for a very little added fee.
At the back there is the version and a ID tag that the fab adds on them so it would annoy you even more.
matrixmodulator@gmail.com
Seaweed Sound
Thanks thumbs up
MUFF WIGGLER Forum Index -> Eurorack Modules  
Page 1 of 1
Powered by phpBB © phpBB Group