MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

moogerfooger box
MUFF WIGGLER Forum Index -> Music Tech DIY  
Author moogerfooger box
Luka
im making something in a moogerfooger style box
can someone quickly measure up the dimensions if they have one
measurements dont have to be ultra accurate, just rough is fine

box length x width x height
wood panel width x length x height

also does it use a wallwort / wall adapter or can you just plug it in with a IEC cord?


thanks kids

this is what im making..
first draft of my Jhaible Compact Clone phaser box



still lots to add and tweak on this design
just working out dimensions now
Roycie Roller
Nice looking design! I have the Analog Delay, it uses a 9v wall wart. Dimensions are 9''L x 6"W, 2.5"H (at it's highest point, at the top), then the side panels taper down to 1" at the bottom. This includes the wood. The wood is about 1cm thick, and only comes up about 1mm or 2mm from the metal, all round.

What are you using to do your graphics?
Luka
thanks for that
they are a lot smaller than i thought


im just using photoshop, its a good program to muck around with ideas
not so good for vectors, hence my vectors are a bit cut and paste
it is killing my macbook though as it isnt UB, im still using CS1 confused

no more student software prices for me, dang
wish i had bought a whole tonne of software before i finished uni
Kent
Luka, if you are gonna make those, I'd love to pick up a couple of blank boxes from you. You already KNOW what I'm gonna stuff them with!
Luka
yeah sure
i could even design a panel for the triple chorus is you want
i think i might make one eventually
ill send you an email
Kent
Awesome. Thanks. That would be very kind of you.
flts
Luka wrote:
wish i had bought a whole tonne of software before i finished uni


I'm thinking about right that now, still a few months of working on my M.Sc. thesis left... I haven't really bought that much student-priced software since what I have is from companies that either don't have those discounts or have some catches with the student licenses.

I've been thinking about making the Compact Clone at some point too. I haven't checked out the schemos nor parts lists that well yet, does it have any hard-to-find / expensive stuff?
Luka
yeah the lamps / lamp sockets and relays are pretty annoying to find
however you can buy a rare parts kit from bfunk on electro-music
gaslampmusehog
Luka, I'm modding all my foogers right now to be in the cp-251 style housing, in a month i'll probably have a whole bunch of the wood sides available... let me know if your interested.
Roycie Roller
Luka wrote:
yeah the lamps / lamp sockets and relays are pretty annoying to find
however you can buy a rare parts kit from bfunk on electro-music


Tip shops, my friend! Tonnes of that shit for nuthin'!
Luka
yes but the lamp sizes / power rating are not standard down here
and also the relay could not be found locally

i do love tip shops though smile
i wish northcote still had a tip
MUFF WIGGLER Forum Index -> Music Tech DIY  
Page 1 of 1
Powered by phpBB © phpBB Group