MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Final Layout, I'm rolling with it.
MUFF WIGGLER Forum Index -> Eurorack Modules  
Author Final Layout, I'm rolling with it.
tragedybysyntax
What do you guys think?
Keep in mind this sits ontop of my frac rig. I have everything except for the headphone preamp and the matrix mixer. (well... and the QMMG, but that comes in next week) Sexxy euro rig I think! Almost time to build a 2nd case!!!


BananaPlug
How about a pic with the Frac setup?
chimologic
I suppose that your Frac has several E.G.s? not seeing what you will clock with the tap clock otherwise. if this is a setup for drones then loose switch the tap clock for something else, another oscillator or some elf lfos for more modulation
MrDys
Edit: Nevermind. I'm an idiot.
parasitk
chimologic wrote:
I suppose that your Frac has several E.G.s? not seeing what you will clock with the tap clock otherwise. if this is a setup for drones then loose switch the tap clock for something else, another oscillator or some elf lfos for more modulation


If the clock spits out triggers it will be a great companion to the QMMG.
tragedybysyntax
I"ll post my frac pic tomorrow morning with this post. But... I have 1 EG and 1 VCS in the frac. As well as a metalbox sequential switch and a metalbox divider logic. smile
Kent
MrDys wrote:
Edit: Nevermind. I'm an idiot.



Yes, we know. But we love you all the same. Hug
chimologic
parasitk wrote:
chimologic wrote:
I suppose that your Frac has several E.G.s? not seeing what you will clock with the tap clock otherwise. if this is a setup for drones then loose switch the tap clock for something else, another oscillator or some elf lfos for more modulation


If the clock spits out triggers it will be a great companion to the QMMG.


how so? a trigger is a super short pulse and would only open one of those gates for a very short time. you'd get no envelope variation of shape and duration with just a trigger? I guess you could get some variation on the ring amount on the QMMG controls but that seems limited.

Or am I missing something?
parasitk
chimologic wrote:
parasitk wrote:
If the clock spits out triggers it will be a great companion to the QMMG.


how so? a trigger is a super short pulse and would only open one of those gates for a very short time. you'd get no envelope variation of shape and duration with just a trigger? I guess you could get some variation on the ring amount on the QMMG controls but that seems limited.

Or am I missing something?


From messing with my Borg 2, low pass gates (and vactrols) love triggers! I mean, if you're going for that classic plucky sound. The vactrol will decay it enough to get a sweet ring. The QMMG seems to offer some sort of dampening too, so that offers more tonal variation.

A variable width gate is great too for variation, of course. I was just commenting that he'd have a veritable pluck-fiesta with that setup. w00t
dkcg
chimologic wrote:
parasitk wrote:
chimologic wrote:
I suppose that your Frac has several E.G.s? not seeing what you will clock with the tap clock otherwise. if this is a setup for drones then loose switch the tap clock for something else, another oscillator or some elf lfos for more modulation


If the clock spits out triggers it will be a great companion to the QMMG.


how so? a trigger is a super short pulse and would only open one of those gates for a very short time. you'd get no envelope variation of shape and duration with just a trigger? I guess you could get some variation on the ring amount on the QMMG controls but that seems limited.

Or am I missing something?


I've been using the M13 with pulses, it (and the QMMG) are slow enough because of the vactrols to sound more like a woody hit or pluck. The Tap Clock sounds awesome opening and closing a LPG with it' triggers. The LPG acts like a slew. You can see what the Model 13 gate does to square waves (essentially long triggers) in a video I did near the end.

http://www.youtube.com/watch?v=PGZtoQGDfNc&fmt=18
felix
The Tap Clock puts out gates, btw. The signal is high for the entire note duration.

The accent outs are gates as well, but slightly rounded at the top edges so that it's a little smoother for using with a VCA or Filter.
parasitk
oh well. :(
dkcg
You could get a Triple Timer and make your own gates and triggers from your LFOs. grin
GCF
The MakeNoise and Harvestman modules look pretty nice together.
timmah
your euro rack is racialist. all american modules smile
dkcg
timmah wrote:
your euro rack is racialist. all american modules smile


I didn't even notice it was a eurorack with not one European module. lol

Does that make it a freedomrack? eek!
brandon daniel
That's a bizarro box, for sure. Looks like fun, assuming you've got the basic bases covered by your frac.
tragedybysyntax

That's the frack that the euro case sit's ontop of.

Top row is Pulse Divider Logic, Oakley Lag, Sequential Switch
2nd row is MOTM Ladder Filter, Miniwave, VCS, EG1, Improb Drive
3rd row is CV'd Fuzz Factory, Plague Bearer, 808 kick
MUFF WIGGLER Forum Index -> Eurorack Modules  
Page 1 of 1
Powered by phpBB © phpBB Group