Delptronics Sequencer + Weevil?

Modular and other sound devices from BugBrand.

Moderators: Kent, infradead, BugBrand

Post Reply
User avatar
nrdvrgr
Working at NASA on acid
Posts: 3561
Joined: Tue Dec 29, 2009 5:17 pm
Location: Wermland, Sweden

Delptronics Sequencer + Weevil?

Post by nrdvrgr » Fri Dec 10, 2010 3:24 am

Just found this little sequencer:

http://delptronics.com/bendersequencer.php

If I wanted to use this to sequence a Board/postcardweevil, where would I need to put the cables?

I know this has been discussed somewhere before, but not with this device as sequencer.
-Extendunt barbam tuam, et velo-

WEBSITE: http://www.nordvargr.com
BUY/LISTEN: http://nordvargr.bandcamp.com
VIDEO: http://vimeo.com/nrdvrgr

User avatar
BugBrand
Knowledge of Bugs
Posts: 7086
Joined: Tue Jul 15, 2008 11:59 am

Post by BugBrand » Fri Dec 10, 2010 5:02 am

I'm not at all sure about using the trigger part.
For the seq. parts you should try connecting over the pitch dials for the oscs - on both the B & P Weevils these come out to touch-plates. Just use a multimeter to figure out which.
Take a vid of any resulting action!!

User avatar
nrdvrgr
Working at NASA on acid
Posts: 3561
Joined: Tue Dec 29, 2009 5:17 pm
Location: Wermland, Sweden

Post by nrdvrgr » Fri Dec 10, 2010 5:10 am

If I buy one I´ll document the results... let´s see what Santa brings first.
Thanks for the reply!
-Extendunt barbam tuam, et velo-

WEBSITE: http://www.nordvargr.com
BUY/LISTEN: http://nordvargr.bandcamp.com
VIDEO: http://vimeo.com/nrdvrgr

User avatar
chrisdermo
Ultra Wiggler
Posts: 874
Joined: Sun May 20, 2012 1:52 pm

Post by chrisdermo » Sun Sep 29, 2013 4:06 pm

Got one of these ages ago and just built it, the trigger part works wonderfully, you can patch 2 touch plates together and it will connect and disconnect them in time with the sequencer rate.
The pots that came with the sequencer do very little to the pitch so I think I need to swap them out for ones of the same value as those on boardweevil itself.

User avatar
chrisdermo
Ultra Wiggler
Posts: 874
Joined: Sun May 20, 2012 1:52 pm

Post by chrisdermo » Tue Nov 19, 2013 7:12 pm

if anyone is still interested in sequencing the weevil's I can vouch for the hours and hours of fun to be had with a delptronics bender sequencer and a weevil.
I've used this thing with my boardweevil 2012, travel weevil, cube weevil and WOM all with wildly different results.

Here's a 7 minute muckabout with the sequencer and a boardweevil 2012 that shows some of the mad possiblities to be had here, especially when getting involved with the power starve!

Recorded line in from the weevil no fx, just a very light limiter on the master buss. Cans or speakers recommended for the bass resonance off the filter.

http://soundcloud.com/dermo/bugmuckabout

User avatar
chrisdermo
Ultra Wiggler
Posts: 874
Joined: Sun May 20, 2012 1:52 pm

Post by chrisdermo » Tue Nov 19, 2013 7:20 pm

p.s. it's a 96khz wav file downlad if anyone prefers to hear it in high-res

User avatar
KNYST
hiding in the forest
Posts: 2913
Joined: Mon Jan 26, 2009 10:09 am
Location: the Taiga, Sweden

Post by KNYST » Wed Nov 20, 2013 4:08 am

Fun! :party:
NOISE HEALS.
patch responsibly.
LISTEN | WATCH

Post Reply

Return to “BugBrand Devices”