Wiard mounting strips/rails?

Discussion and support for Wiard Products

Moderators: Kent, carygrace, grantrichter

Post Reply
daveoftheuniverse
Learning to Wiggle
Posts: 3
Joined: Tue Dec 23, 2008 6:29 pm

Wiard mounting strips/rails?

Post by daveoftheuniverse » Fri Feb 13, 2009 9:33 am

I've been asked to build a rack cabinet for some Wiard modules, and I'm wondering what might be recommended as far as mounting rails. I know that Wiard sells the 301 adapters which will fit 6 units into a standard 19" rack, but those are $200 a piece and this is going to be a rather large cabinet which will house 24 Wiard modules (12 on each tier), and the customer hopes to have some kind of pre-drilled mounting rails/strips, top and bottom, rather than the adapters. Anybody know of anyone who has made anything similar or if there might be some kind of pre-fab strips available somewhere? Any help would be appreciated. Thanks!

Post Reply

Return to “Wiard”