MUFF WIGGLER Forum Index

 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Information
Working on fixing the 'session logged out' issue - please log out and log back in as there is a new cookie name. It MAY be worse for a while, sorry. We'll see... I'm working on it. Thanks

tightening jacks
MUFF WIGGLER Forum Index -> Wiard  
Author tightening jacks

construct09

Hi, Is there a specific tool for tightening the in/out jacks?


fester

mouser.com
part# 382-0006

http://www.mouser.com/ProductDetail/382-0006/?qs=sGAEpiMZZMttMvWf8RAaf QRUmZ9qcP2NXMf%252b4M1ssQQ%3d


construct09

Thanks fester


thesnow

is there any type of commercial hardware store where I can go to to buy this tool? some jacks on my waveform city are wiggly help

$8 + $8 shipping is nuts.


construct09

Thats a bargain!!
Based on my location I,d have to place a $200 order with mouser to get that fucker???


thesnow

Didn't know that. Guess I might just have to buy it then. I only need 1.

edit:

now that I have you guys here, do you ever come across that jack once in a while that feels like there's some sort of "click" or "pop" before it makes the full insertion/connection? for example when you plug a patch chord slowly into each jack on the module and that one has a slight "click" or "pop" type of feel before it reaches full insertion/connection. it feels weird.


construct09

Looks like a screwdriver with a socket attatchment on the end....
You could prob get one from your local specialist tool supplier

There is a diagram of it in the link provided...


thesnow

Thanks!

You ever come across any jacks like the one I mentioned above?


construct09

I think there are the same or similiar on some euro
Theres another thread here on muffs...somewhere...regarding these jacks.
Someone mentioned they can split easily if you overtighten them, so, finger tighten only
I,m sure the wiard ones would be good quality though


construct09

Not the thread I was looking for but....

https://www.muffwiggler.com/forum/viewtopic.php?t=77539&highlight=knur led+nut

Theres a few threads, search 'knurled and nut and driver'


thesnow

I ordered the part from mouser. It's only one jack (sine wave out) I notice that is wiggly when I put a patch chord in, but I might as well have that tool on deck I guess. I'll make sure not to over tighten the jack that much. Thanks for the help.

The triangle out jack has a slight "click" or "pop" feeling in between the initial insertion and full insertion. feels a little weird but the module is an older module.

MUFF WIGGLER Forum Index -> Wiard  
Page 1 of 1
Powered by phpBB © phpBB Group