MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Lost Sherman Filterbank Adapter
MUFF WIGGLER Forum Index -> Guitars, Basses, Amps & FX  
Author Lost Sherman Filterbank Adapter
swordsect
I lost my Sherman Filterbank adapter, its the FB2 version.
Anybody know the specs on the adapter so i can replace it?

thanks!
surachai
I'll just write everything I see:

Model No: APX412055
Input: 120V AC 60Hz 11W
Output: 15V AV 500mA
Class 2 Transormer

Let me know where you find a place that sells replacements. I've always been curious but too fat to look around google.
kidtesla
http://bigcitymusic.com/product.asp?cat=new&pid=1000354
surachai
THAR SHE BLOWS! Good call Tesla. I should learn how to use the intertubes.
wetterberg
surachai wrote:

Output: 15V AV 500mA
- is half the important bits - what is the polarity of it?

FYI the 15v 0.5A specs means that universal wall wart thingies will work here.
Kent
I think that it is supposed to be "AC". Therefore, no polarity need apply here.
wetterberg
ah, well then there's all the info needed, really.
thomas6025
Intact Herman at Sherman directly. That's what I did. He responded super fast and helped me sort out the problem of a bad online vendor sending me the wrong one (sent 12v not required 15v). It will take some time to get to the States but I just feel better getting one from manufacturer when possible.
Futuresound
I bought a replacement from Big City Music last year, it worked perfectly.

For some reason it never occurred to me to contact Sherman... That's probably the best route, but options are always good.
thebends9
Bumping this up top - Are there any US based vendors with a comparable adapter?
MUFF WIGGLER Forum Index -> Guitars, Basses, Amps & FX  
Page 1 of 1
Powered by phpBB © phpBB Group