.SHN and Switch update if you care.

Discussion and support for STG Soundlabs modules of all formats.

Moderators: Kent, infradead, suitandtieguy

User avatar
suitandtieguy
Hammond King
Posts: 3358
Joined: Sun Feb 03, 2008 11:50 pm
Location: Chillicothe IL USA

.SHN and Switch update if you care.

Post by suitandtieguy » Wed Aug 17, 2011 7:27 am

.SHN (Sample Hold/Noise, part of a 1MU noise/sh/asr module as well) is verified, changes notated. signal input/output appears to be as close to 1:1 as my scope can show, and the transition time is at 200 microseconds from a 5v pulse. changes will be rolled into PCB revision, which will move the design from through-hole to SMT, then re-verified and put to production. SMT board depth is currently estimated at 1.75".

Switch prototype shows input/output to be 1:1 as well, but is showing behavioiur which requires more attention. It's being sent to Det3 today for further analysis this weekend.
http://suitandtieguy.com
http://stgsoundlabs.com
suboptimal wrote:... if it's music you want to make with your modular, STG should be in your system.

User avatar
flippantminister
0118 999 881 999 119 7253
Posts: 491
Joined: Wed May 07, 2008 11:03 am
Location: birmingham, alabama

Post by flippantminister » Wed Aug 17, 2011 2:12 pm

yay, looking forward to .shn!

User avatar
mikecameron
Thread Killer
Posts: 976
Joined: Sat Nov 20, 2010 2:13 am
Location: Peoria, IL
Contact:

Post by mikecameron » Wed Aug 17, 2011 2:47 pm

Was at the soundlab last night and brought home a prototype .SHN to play with. This workday couldn't end soon enough!

Really digging the concept behind the switch. Hope the issues are easily ironed out.

User avatar
companyofquail
Veteran Wiggler
Posts: 504
Joined: Wed Aug 08, 2007 12:49 pm
Location: :party: abingdon va usa

Post by companyofquail » Fri Aug 19, 2011 3:13 am

booyah

User avatar
suitandtieguy
Hammond King
Posts: 3358
Joined: Sun Feb 03, 2008 11:50 pm
Location: Chillicothe IL USA

Post by suitandtieguy » Fri Aug 19, 2011 3:37 am

[video][/video]
http://suitandtieguy.com
http://stgsoundlabs.com
suboptimal wrote:... if it's music you want to make with your modular, STG should be in your system.

User avatar
Henfield
Better Chemistry through Sound
Posts: 1214
Joined: Thu Feb 12, 2009 12:20 am
Location: Detroit, MI

Post by Henfield » Fri Aug 19, 2011 7:54 am

mikecameron wrote:Was at the soundlab last night and brought home a prototype .SHN to play with. This workday couldn't end soon enough!

Really digging the concept behind the switch. Hope the issues are easily ironed out.
Lucky you!! What do you have to do to get this type of honor! I am not worthy!!!

User avatar
reppiks
Obscure Intergalactic Destroyers!
Posts: 1907
Joined: Fri Nov 12, 2010 7:43 pm
Location: Tokyo

Re: .SHN and Switch update if you care.

Post by reppiks » Fri Aug 19, 2011 9:01 pm

suitandtieguy wrote:.SHN (Sample Hold/Noise, part of a 1MU noise/sh/asr module as well) is verified, changes notated. signal input/output appears to be as close to 1:1 as my scope can show, and the transition time is at 200 microseconds from a 5v pulse. changes will be rolled into PCB revision, which will move the design from through-hole to SMT, then re-verified and put to production. SMT board depth is currently estimated at 1.75".
I care!! Been looking forward to the .SHN sine it was first talked about...
do you have an estimate on when and how much, pretty please?

User avatar
reppiks
Obscure Intergalactic Destroyers!
Posts: 1907
Joined: Fri Nov 12, 2010 7:43 pm
Location: Tokyo

Post by reppiks » Fri Aug 19, 2011 9:03 pm

mikecameron wrote:Was at the soundlab last night and brought home a prototype .SHN to play with. This workday couldn't end soon enough!
tell us about your thoughts on the .SHN prototype!

User avatar
suitandtieguy
Hammond King
Posts: 3358
Joined: Sun Feb 03, 2008 11:50 pm
Location: Chillicothe IL USA

Post by suitandtieguy » Fri Aug 19, 2011 11:14 pm

Henfield wrote:Lucky you!! What do you have to do to get this type of honor!
he's a nice guy who comes over and does some soldering to keep me from having a nervous breakdown.

Donald Crunk will have another one of these prototypes at the gathering next weekend in Marseilles IL.
reppiks wrote:I care!! Been looking forward to the .SHN sine it was first talked about...
do you have an estimate on when and how much, pretty please?
within 2 months, and it should be price-comparable to the other utility modules i have.
http://suitandtieguy.com
http://stgsoundlabs.com
suboptimal wrote:... if it's music you want to make with your modular, STG should be in your system.

User avatar
reppiks
Obscure Intergalactic Destroyers!
Posts: 1907
Joined: Fri Nov 12, 2010 7:43 pm
Location: Tokyo

Post by reppiks » Fri Aug 19, 2011 11:16 pm

suitandtieguy wrote:within 2 months, and it should be price-comparable to the other utility modules i have.
cool thanks!

User avatar
Henfield
Better Chemistry through Sound
Posts: 1214
Joined: Thu Feb 12, 2009 12:20 am
Location: Detroit, MI

Post by Henfield » Fri Aug 19, 2011 11:18 pm

STG, between you and OakleyKrisp1, all these new MU modules are going to keep me broke for the forseeable future! I can see this module and the Octave divider module making their ways into my cabinet!!!

User avatar
mikecameron
Thread Killer
Posts: 976
Joined: Sat Nov 20, 2010 2:13 am
Location: Peoria, IL
Contact:

Post by mikecameron » Sat Aug 20, 2011 5:47 pm

reppiks wrote:
tell us about your thoughts on the .SHN prototype!
Not much to say really. Works as expected? I mean, this is the type of module that should just do what it's supposed to do. Which it does.

GREATEST S&H MODULE EVAR!! :bacon: :banana: :deadbanana:

User avatar
reppiks
Obscure Intergalactic Destroyers!
Posts: 1907
Joined: Fri Nov 12, 2010 7:43 pm
Location: Tokyo

Post by reppiks » Sat Aug 20, 2011 6:07 pm

Goodo, thanks !

User avatar
Christopher Winkels
Lord of Tweed Manor
Posts: 4412
Joined: Sun May 03, 2009 6:53 pm
Location: Burlington, Ontario, Canada, Earth, Solar System, Milky Way, Virgo Supercluster

Post by Christopher Winkels » Sat Aug 20, 2011 6:35 pm

Henfield wrote:STG, between you and OakleyKrisp1, all these new MU modules are going to keep me broke for the forseeable future! I can see this module and the Octave divider module making their ways into my cabinet!!!
Add Doug's SSL stuff to that list and I'll have to take out a second mortgage. :tu:

User avatar
suitandtieguy
Hammond King
Posts: 3358
Joined: Sun Feb 03, 2008 11:50 pm
Location: Chillicothe IL USA

Post by suitandtieguy » Sun Aug 21, 2011 8:22 am

oh well now it looks like i'll be using the Switch next weekend in the field.
http://suitandtieguy.com
http://stgsoundlabs.com
suboptimal wrote:... if it's music you want to make with your modular, STG should be in your system.

User avatar
WaveRider
Super Deluxe Wiggler
Posts: 1626
Joined: Mon Oct 04, 2010 1:08 pm
Location: Montreal

Post by WaveRider » Sat Sep 10, 2011 6:46 pm

flippantminister wrote:yay, looking forward to .shn!

+1

User avatar
hiawog
Ultra Wiggler
Posts: 892
Joined: Wed Jun 29, 2011 3:59 pm
Location: screwston tx

Post by hiawog » Wed Sep 14, 2011 4:26 pm

suitandtieguy wrote:within 2 months, and it should be price-comparable to the other utility modules i have.
this is exciting news! :party: i've been wanting.

User avatar
Drumdrumdrumdrum
What she said
Posts: 2720
Joined: Tue Jul 26, 2011 6:06 am
Location: Tropical Australia

Post by Drumdrumdrumdrum » Thu Sep 15, 2011 9:15 am

There are no S&H mods anywhere to buy from anyone right now, so I may as well wait for this one, hey?
"There are two means of refuge from the miseries of life: music and cats."
- Author, Albert Schweitzer.

"Modular synths can take your ego out of the equation which, in music, is a blessing" - Jeremy Greenspan


http://www.cdbaby.com/cd/glennkingsleymortimer

User avatar
Neo
Ultra Wiggler
Posts: 899
Joined: Wed Jul 06, 2011 2:22 am
Location: Bogota

Post by Neo » Wed Sep 21, 2011 6:24 am

WaveRider wrote:
flippantminister wrote:yay, looking forward to .shn!
+1
+1

User avatar
hiawog
Ultra Wiggler
Posts: 892
Joined: Wed Jun 29, 2011 3:59 pm
Location: screwston tx

Post by hiawog » Sat Sep 24, 2011 7:33 pm

hey suitandtieguy - as i mentioned i'm also psyched about .shn. you may have seen the recent threads regarding the noise output level on elby and asys's sh/noise modules. apparently both are pretty low (i think i remember someone metering like 1.7v?). any chance you can speak to the noise level you're getting?

thanks!

User avatar
mckenic
pew!pew!pew!kthnxbye!
Posts: 6340
Joined: Fri Aug 06, 2010 8:05 pm
Location: Limerick, Ireland

Post by mckenic » Sat Sep 24, 2011 8:01 pm

Sorry if this is a silly question mate - will this be available in Euro format alos please?

Really stupid of my - I sold my Asol Sample Hold/Noise and would LOVE this!

User avatar
suitandtieguy
Hammond King
Posts: 3358
Joined: Sun Feb 03, 2008 11:50 pm
Location: Chillicothe IL USA

Post by suitandtieguy » Sun Sep 25, 2011 5:40 am

yes. both.
http://suitandtieguy.com
http://stgsoundlabs.com
suboptimal wrote:... if it's music you want to make with your modular, STG should be in your system.

User avatar
mckenic
pew!pew!pew!kthnxbye!
Posts: 6340
Joined: Fri Aug 06, 2010 8:05 pm
Location: Limerick, Ireland

Post by mckenic » Sun Sep 25, 2011 6:00 am

:yay:

Excellent! Thanks for that! Hurry please!

:tu:

User avatar
reppiks
Obscure Intergalactic Destroyers!
Posts: 1907
Joined: Fri Nov 12, 2010 7:43 pm
Location: Tokyo

Post by reppiks » Tue Oct 11, 2011 8:08 am

reppiks wrote:
suitandtieguy wrote:within 2 months, and it should be price-comparable to the other utility modules i have.
cool thanks!
Is the .SHN still on target in the coming weeks?
Cheers!

User avatar
alexwhite
intrinsically linked
Posts: 223
Joined: Fri Jan 07, 2011 10:40 pm

Post by alexwhite » Wed Oct 19, 2011 3:27 pm

Very keen for this - I'm hoping it won't be super deep? I have to lose my Elby S+h n because my new case can't accommodate it.

Post Reply

Return to “STG Soundlabs”