MUFF WIGGLER Forum Index

 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler Blog & NewsMW News   Muff Wiggler StoreMW Store 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

[ORDER] CGS Euro Panels
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2, 3, 4, 5, 6  Next [all]
Author [ORDER] CGS Euro Panels

clarke68

The MSU, Quad Slope, and Funky Drummer panels are sold out, and there is but a handful of West Coast Mini Synth panels left. If you're interested in a sold out panel, send me a PM and I'll add you to the wait list.

Thanks everybody!



CGS MSU

The MSU is now sold out. If you're interested in getting one, send me a PM to be added to a wait list for another run (I'll order once the wait list is long enough).


Quad Slope

The Quad Slope is now sold out. If you're interested in getting one, send me a PM to be added to a wait list for another run (I'll order once the wait list is long enough).


West Coast Mini-Synth



Funky Drummer



The Funky Drummer is now sold out, the remaining panels are $35USD each.

Shipping is $5.35USD anywhere in the U.S., or $16.95USD anywhere in the world. Shipping charges are per order...it doesn't matter how many panels you order, the shipping charges are the same.

There is more information about these (and other) panels in this thread.


clarke68

Ordering is now closed. I will probably have a few extra panels once all the of the paid orders are shipped, just send me a PM about any that you're interested in.

Thanks!


clarke68

Order List


bensaddiction - 1 MSU, 1 Mini-Synth
cillianjohn - 1 MSU, 1 Mini-Synth
cranksatori - 1 MSU, 1 QuadSlope
demian - 1 MSU, 3 Quad Slope, 1 Mini-Synth, 1 Funky Drummer
fate - 1 MSU
frax - 2 Quad Slope
janvanvolt - 1 MSU
lazerkind - 1 MSU, 1 Mini-Synth, 1 Funky Drummer
maskull - 1 MSU, 1 Quad Slope
mono-poly - 1 MSU, 4 Quad Slope, 1 Mini-Synth, 1 Funky Drummer
opsysbug - 1 MSU, 1 QuadSlope
mikecameron - 1 MSU
marketingslime - 2 MSU, 2 Quad Slope, 2 Mini-Synth, 2 Funky Drummer
microscopial - 1 MSU, 1 Quad Slope, 1 Mini-Synth, 1 Funky Drummer
Monobass - 1 MSU, 1 Quad Slope, 1 Mini-Synth
nangu - 3 MSU, 2 Quad Slope, 3 Mini-Synth, 3 Funky Drummer
negativespace - 2 MSU, 2 Mini-Synth
numan7 - 1 MSU, 1 Quad Slope, 1 Mini-Synth, 1 Funky Drummer
oberkorn - 1 Quad Slope
prinsen - 1 MSU, 1 Quad Slope, 2 Mini-Synth, 2 Funky Drummer
rico loverde - 1 Quad Slope, 1 Mini-Synth
ringstone - 1 MSU, 1 Quad Slope, 1 Mini-Synth, 1 Funky Drummer
scozbor - 1 MSU, 2 Quad Slope, 1 Mini-Synth, 1 Funky Drummer
smrl - 1 MSU, 1 Mini-Synth
synchromesh - 1 Quad Slope
theabsent - 1 MSU, 1 Quad Slope, 2 Mini-Synth
thebot - 1 MSU, 1 Mini-Synth
Veqtor - 1 MSU, 1 Quad Slope, 1 Funky Drummer

I have received payment from people in blue


clarke68

MSU Build Guide



If this is too much of an eye chart, let me know and I can post a pdf. When the panels get in I'll put this (and others like it) in a dedicated build thread, but I wanted to get this out now for those who want to start ordering parts (and also as an excuse to give this thread a bump!).

For detailed wiring diagrams, see the CGS website:
CGS29 - Wave Multiplier
CGS35 - Synthacon VCF
CGS77 - Serge '73 VCF


Microscopial

hi clarke, id like all three but I wont have money till 1st oct when I get paid, is that ok im defo good for the money thumbs up thumbs up thumbs up


clarke68

Very cool! You can place an order any time (this month)...when I receive it I'll send you an Paypal invoice due 10/1.

Fact is...the 1st is a Saturday, I was going to take the weekend to finalize everything and place the order on Monday the 3rd. As long as you get payment in as close to the 1st as you can, we'll be good!


clarke68

Hey just a quick note:

When I started taking orders for panels, I also started receiving emails "from" Nacha.org, saying some "ACH payments" had been rejected.

Turns out, this is a known phishing scam. The headers in the emails I receive seem to confirm this.

If you happen to get one of these, DO NOT click on any links in the email! It will infect your computer with malicious code.

The real NACHA (the Electronic Payments Association), advises us to instruct customers to forward suspected emails to [email protected] for analysis. However, I just sent my last one to them and it bounced back...presumably they are getting a lot of these.

Also wanted to reassure those of you who have paid (blue in the post above) that I have indeed received your payment, and everything is fine.

All for now!


SMS303

clarke68 wrote:
Order List
mono-poly - 1 MSU, 2 Quad Slope, 1 Mini-Synth

Mono-Poly ordered my Quad Slope...
Many thanks too Clarke68 for designin the panels plus making this groupbuy possible and Mono for ordering the panel for me thumbs up Guinness ftw!


rico loverde

Payment sent for one west coast mini synth, will be sending you another for the quadslope soon


clarke68

Got it...thanks!


clarke68

Hey Gang,

just wanted to let you know I made an update to the West Coast Mini Synth panel. Negativespace gave me suggestion of a better way to lay out the VCA section.

Take a look in the first thread and let me know what you think, although I'm pretty set on going with this because it's way better than what I had...functionality is the same. Thanks Negativespace!


rico loverde

I like that way better. Very excited for this.


clarke68

Quad Slope Build Guide



This panel uses 2 CGS114 PCBs.

Note that building out CGS114 is a tad rough...it wasn't intended to become a mainstream PCB (but has caught on for obvious reasons). As such, it doesn't have a proper power connector, and the overall panel wiring isn't quite a clear as some of Ken's other projects. Everything you need to know is at the link above (and I've tried to help with this build guide), it just takes a little more brain power to figure it all out.

That said, if you want an easier time (and don't mind spending twice the money for twice the number of PCBs) you might consider building 4 CGS75 instead.


clarke68

West Coast Mini Synth Build Guide



For detailed wiring diagrams, see:

CGS48 - VCO
CGS64 - VCA
CGS67 - Active Real Ring Mod
CGS114 - DUSG
CGS04 - Mixer


lazerkind

Equally awesome panel design from the inside" SlayerBadger!


rico loverde

Second order and payment sent for a quadslope. Hey Clark I just noticed your in Sf, we should have a little building party when these come in! w00t


clarke68

Serious, Rico...that would be awesome! Let's chat after the panels arrive!


clarke68

Final week for orders...if you want in, get in soon!

*** Update ***

The Funky Drummer panel is available!

Enough people expressed interest in making this panel a reality (now you all just need to order!) 8_)

See the first post for details...this one is $45USD. To order, send me the info in the 2nd post above...if you already have an order in you don't need to pay for shipping again.


clarke68

Last day to order!

Tomorrow morning I will close the thread to new orders so I can get an accurate count and start putting together the manufacturing order.

Get 'em in while you can! thumbs up


clarke68

Wow guys...82 panels!

I'm going to spend the afternoon going over everything one last time, then tomorrow these are off to Metalphoto of Cincinnati. I'll post any updates, info about turnaround times, etc. as I get it. You've all done me right proud, thanks for all the support!


negativspace

Thank you for putting these together, you did a great job on the module selection as well as the graphic design. I can't wait to build 'em up!


scozbor

negativspace wrote:
Thank you for putting these together, you did a great job on the module selection as well as the graphic design. I can't wait to build 'em up!


+1 thumbs up

Can't stop there though! Need more panels! These will make an excellent suitcase.

Oh and payment sent btw....


Veqtor

Really looking forward to these, it's going to be awesome!


clarke68

Looking forward to these myself!

Just got off the phone with MPC...the order is officially placed. thumbs up Next step is they will email me final art proofs the week of October 17th. I assume I'll be able to post those, I'll at least be able to let you know when they come. Once those are approved, they expect to ship the panels to me on the 27th, and will probably be arriving here the week of November 7. The I go in to mad shipping mode!

You've all paid for USPS Priority shipping...so U.S. based guys will get their panels pretty quick, within 2-3 days of whenever I can get those out the door. International shipping looks to be a week or two.

Full pics of the whole process! It's peanut butter jelly time!


rico loverde

The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense The Chewbacca Defense

MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2, 3, 4, 5, 6  Next [all]
Page 1 of 6
Powered by phpBB © phpBB Group