MUFF WIGGLER Forum Index

 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Information
Working on fixing the 'session logged out' issue - please log out and log back in as there is a new cookie name. It MAY be worse for a while, sorry. We'll see... I'm working on it. Thanks

Preamp for processing sounds.
MUFF WIGGLER Forum Index -> Wiard  
Author Preamp for processing sounds.

wavecircle

I tried playing with the envelope follower on the VCO and WFC today but my ipod puts out a puny signal. What do folks use? I just need gain for processing external sounds. I am sure my Machinedrum will be loud enough, as will anything coming out of my MOTU 828.

Something small, cheap and effective please!


Illiac

Circuit Abbey Gozinta thumbs up
http://postmodular.co.uk/circuit-abbey/gozinta


wavecircle

Eurorack is no good to me at the moment.

Does anyone have the ART stuff? They do a basic but well specced 1in 1out preamp for £32.

http://www.artproaudio.com/products.asp?id=1&cat=1&type=79


Illiac

d'oh! sorry


tIB

how much gain do you need? would a headphone amp like this do it?

http://www.amazon.co.uk/FiiO-E5-Headphone-Amplifier-Black/dp/B0026RJQJ 6


Hi5

mxr microamp pedal is easy and simple.
it is even endorsed by Rex for use with Serge!


wavecircle

I honestly don't know how much gain I would need, hence asking on the Wiard board.

I did have the same problem in Eurorack though. ipod signals are very quiet once they step into modulars. It don't mind if it goes a little overboard and distorts. The ART stuff looks good.


Hi5

ART gear is pretty bad and will color things a bit but since you are not coming from low mic levels they may not be as problematic.
iPods are at line level so you will need only about 10x gain or so at max.


Reptil

Illiac wrote:
Circuit Abbey Gozinta thumbs up
http://postmodular.co.uk/circuit-abbey/gozinta


in the post on it's way to here
thumbs up


A Dingleberry Monstrosity

SHERMAN!!!!!!!!


kragg

Hi5 wrote:
mxr microamp pedal is easy and simple.
it is even endorsed by Rex for use with Serge!

Hi, i'm bringing this topic back from the dead if you don't mind.
When used on synths, will the MXR Micro Amp color the sound or give it some "punch/edge", or will it be transparent in any circonstances ?
Than kyou in advance


Babaluma

the ipod is outputting a headphone signal. radial probably make a great headphone out to line level adaptor thingy (possibly with gain).


Tubeampguy

In the FRAC world we use the Blacet I/O modules.
http://www.blacet.com/IO.html

Also Bugbrand used to make the DD3 VCA/Drive Module This module was offered in Banana or 3.5mm.
http://www.bugbrand.co.uk/index.php?main_page=product_info&cPath=2_6&p roducts_id=66


rico loverde

I've thought about the Mattson Modular preamp/envelope follower. I actually have one in a euro panel right now and they work great. It can run off the same power as the Wiard. I was gonna put one behind a blank Wiard panel I had made at FPD

http://www.mattsonminimodular.com/shop/index.php?main_page=product_inf o&cPath=1_2_14&products_id=33&zenid=d3f1c0dc7a2b63572a63348f5d81006d


JohnLRice

Maybe consider the discontinued Shure FP11? Built like a tank, tons of gain, limiter, battery powered, 3.5mm input and BELT CLIP!!!! eek! screaming goo yo screaming goo yo screaming goo yo screaming goo yo screaming goo yo
http://cdn.shure.com/user_guide/upload/849/us_pro_fp11_ug.pdf



Check eBay, right now there is a new old stock one for $110 and some beat up ones from $40 to $75.

I think it may be on the noisy side (I haven't used it in a while) and there is no phantom power so dynamic mics only.



MUFF WIGGLER Forum Index -> Wiard  
Page 1 of 1
Powered by phpBB © phpBB Group