MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

hordes of chaos
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2  Next [all]
Author hordes of chaos
helitron
UPDATE june 09: finished wink

[/url]


more pics here: http://www.flickr.com/photos/helitron/

Contains Wogglebug, ChaQuo, Noise Cornucopia, MFOS S&H and Plague Bearer. Now I need to get used to it nanners
I skipped the MFB midi/cv psu - power comes from the noise koffer.



hel,



old post:
I am planing to make something out of the populated boards hanging around without beeing used.
since there is no more space in my modular case, i am going to fit them into a small desktop enclosure.
power will come from the MFB midi/cv psu that they use in the kraftzwerg synth.

its going to be a chaos/mayhem machine

well, here's the frontpannel design for now - guess the modules wink
hel
futuresoundsystems
I can definitely spot the ChaQuO and Wogglebug in there.... is there also the MFOS Noise Cornucopia?
gde
futuresoundsystems wrote:
I can definitely spot the ChaQuO and Wogglebug in there.... is there also the MFOS Noise Cornucopia?


i see all of those plus the MFOS board that has a S+H with CV clock
and a plague bearer
helitron
well done guys,


wasnt that hard, eh?

w00t

hel

...now its time to build that thing wink
parasitk
This is cool. I might have to do another panel that is totally focused on Teh Noise! SlayerBadger! SlayerBadger! SlayerBadger!
helitron


It's peanut butter jelly time!
wetterberg
WOAH!!!

Can we get a picture of it from straight on, without cables?
applause we're not worthy
helitron
wetterberg wrote:


Can we get a picture of it from straight on, without cables?
applause we're not worthy


nah, then everyone will see that I screwed up with the drilling machine wink

will post some soon, need some daylight.

hel
sandyb
that is very cool!
excellent work screaming goo yo
DGTom
helitron wrote:
I skipped the MFB midi/cv psu - power comes from the noise koffer.


Cool! I was planning on doing something like this, smaller auxcillary boxes that I can connect to the larger case(s) for power, but which can be left of, or run independant, like an external module of modules MY ASS IS BLEEDING

I really like the design / knob layout, I think it will be a great instument once you've got inside it grin

A worthy partner for the noise koffer!
Luka
mad!
what kind of case is that?
helitron
thanks guys!

as promised heres a mugshot without cables



and theres more on flickr http://www.flickr.com/photos/helitron/
including some peeks inside.

plus heres the first vid: HoC and modded tr606 in tagteam



(dunno how to embed) seriously, i just don't get it

@Luca: thats a hitpult case from conrad electronics
RF
Congrats - thumbs up That's really nice work. I like the vid, too.

bruce
sandyb
i embedded it for you helitron.
all you need to do is select the url then hit the "video" tag box.

sandy
helitron
great!, thanks for that sandy
SepticUnderground
Wow thats absolutly marvelous. Well assembled and printed and so, great soundshaper box you got there....

/me ENVY

:cthlulu:
kidtesla
very nice job!
where did you get the knobs,if I may ask?
helitron
hi kidtesla,

i got the knobs from bazai Music in Germany
http://www.banzaieffects.com/Eagle-knob-19mm-fluted-pr-17444.html

shold be available from other custom guitar shops - just look for fluted eagle knobs.

hel
gaslampmusehog
just wanted to chime in and say excellent work, job well done screaming goo yo
kidtesla
helitron wrote:
hi kidtesla,
i got the knobs from bazai Music in Germany
http://www.banzaieffects.com/Eagle-knob-19mm-fluted-pr-17444.html
shold be available from other custom guitar shops - just look for fluted eagle knobs.
hel
thanks for the info.

I haven't been able to stop staring at the picture! love
What a great performance controller you've built !! thumbs up
Out of the case...and into the world! 8_)
Veqtor
So umm, these knobs, what pot-shafts do they fit?
helitron
6 mm
b3nsf
Hi,

it looks beautiful!!!!!

did you print the graphics on a transparency?

how did you drill the holes, btw, i dont see any mess ups at all!? thumbs up

great job!
mono-poly
screaming goo yo i really love it!
helitron
thanks guys!

@b3nsf: yes, printed backwards on overhead foil. well if you look close enough you see that some holes dont fit to the mechanical parts (especially at some pots). thats because I drilled by hand and didn't have anything to fix the plate.

however, thats not a permanent solution since I also forgot to add two outputs. Just need to convert the design to HPGL and let Schaeffer make me a new frontplate.
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2  Next [all]
Page 1 of 2
Powered by phpBB © phpBB Group