MUFF WIGGLER Forum Index

 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler Blog & NewsMW News   Muff Wiggler StoreMW Store 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

E.A.S. "miss10" HADSR PCB [SOLD OUT]
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2, 3, 4  Next [all]
Author E.A.S. "miss10" HADSR PCB [SOLD OUT]

E.A.S.

theabsent wrote:
I'm interested but would like to see the BOMs (rare parts?) before ordering HADSR & LFO/Noise/S&H boards.


no rare parts in here. all parts available from mouser or similar places.

-Mike


E.A.S.

widdly wrote:
Are you going to do the external signal processor from the ms20? That would be kick arse.

The impossible to get quad ganged reverse audio pots are used in 4 different sallen key filters. I wonder if an OTA could be used instead of the variable resistors so that a normal pot could be used to change the frequency.




I've been toying around with the idea of doing an ESP module pcb and have thought of the ota option as well. If I'm not mistaken it was talked about on the "miss 10" VCO thread. Its something I'm going to look into more.

-Mike


brother303

Hi Mike,

E.A.S. wrote:
On this board Ive also made provision on the board for different gate options.


Could you explain a little more on those gate options,please?

BTW,I´m in for 3 boards... thumbs up

Cheers
Greg


E.A.S.

brother303 wrote:
Hi Mike,

E.A.S. wrote:
On this board Ive also made provision on the board for different gate options.


Could you explain a little more on those gate options,please?

BTW,I´m in for 3 boards... thumbs up

Cheers
Greg


Hi greg,

The original HADSR requires a shorting S-trigger type of gate to pull in input low. Ive kept the original circuit the same but added a simple transistor gate convertor circuit to the input. If you want to build the circuit for modular use, as I assume most people here will, this tiny circuit will keep this circuit a little more "standard".

If you want the original circuit just leave off the extra parts and add a jumper in their place. I'll document this more when the boards come in.

-Mike


brother303

Thanks Mike,

helpful as always.

thumbs up


computer controlled

Yeah, i think i'm gonna have get a couple of these eek!


regenbot

payed 1 x "miss10" LFO, S/H and NOISE PCB and
1x "miss10" HADSR PCB.


Guinness ftw!


gwaidan

Just paid for 1 HADSR and 1 LFO/Noise...


arsonus

Paypaled for 1x LFO, S/H and NOISE PCB and 1x HADSR PCB.


brother303

Hi Mike,

payment sent for 3xHADSR.

thumbs up

Cheers
Greg


nihilist

Please put me down for
1 X HADSR
1 X white/pink noise


keninverse

Mike,
Do you happnen to have a BOM for these as well as the LFO/Noise/SH board put together?


E.A.S.

keninverse wrote:
Mike,
Do you happnen to have a BOM for these as well as the LFO/Noise/SH board put together?


Just added the (basic) BOM on the first post.

-Mike


mamonu

payed for 1 HADSR


Barcode

Payment sent for 1 x "miss10" LFO, S/H and NOISE PCB and 1 x "miss10" HADSR PCB!


theabsent

When?


E.A.S.

Quick update:
I'm doing some final touch-ups to the layout, a little clean-up, final check, and off to the pcb house it goes. I was hoping to get these out a little sooner but I want to make sure everything is perfect before they are made!

-Mike


boothnavy

paid for 4.


raisinbag

Hi there, looking at BOM and wondering if there are any resistors that need to be better than 5%, do any of the Non polarized caps need to be better than Film or ceramic and was wondering if there was a sub for the MC14007? I see mouser has it, but am trying to find as much stuff close to home as I can. Cheers.


iopop

Not sure where your home is, but a CD4007 should probably work fine. Or any other 4007 in the CMOS family.


raisinbag

snow (or not so snowy right now) white north "Canada". I can grab a 4007 near me, so I will try that when it comes time, thanks.


E.A.S.

Just a quick update:

After making adjustment to the pcb and checking over it all several times we have finally placed the order with the PCB house for both the HADSR and the noise-lfo-s/h boards!

The boards should be arriving here in a little under 2 weeks and will be shipped out to you guys shortly after!

Thanks for your patience and support!

-Mike


E.A.S.

First post updated.

These are in stock and will be shipping to those who have already paid shortly!

I will keep these in stock for anyone to order.

When I start running low I will update the first post. Otherwise these are available.

Thanks all!

-Mike


Miss 10 HADSR by itsfatmike, on Flickr


emdot_ambient

thumbs up
Woo hoo!
thumbs up


negativspace

This is 3-bacon news if I've ever heard it. It's motherfucking bacon yo It's motherfucking bacon yo It's motherfucking bacon yo

MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2, 3, 4  Next [all]
Page 1 of 4
Powered by phpBB © phpBB Group