[Orders Closed] - Euro Panels for Thomas White LPGs

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Kent, luketeaford, Joe., lisa

Post Reply
User avatar
clarke68
Making DIY modulars look cool since 2011
Posts: 1584
Joined: Wed Nov 11, 2009 2:44 am
Location: Bay Area, CA
Contact:
Contact clarke68

[Orders Closed] - Euro Panels for Thomas White LPGs

Post by clarke68 » Thu Jan 05, 2012 7:34 pm

This run is sold out. Now checking interest for a 2nd run - click here

I've got two Euro panels available for the Thomas White Resonant LPG PCBs:

Dual LPG
Image
12HP, this requires 2 Thomas White LPG PCBs

The Dual panels are $20USD each.
Technically, we need 15 orders to get this price. Based on the interest in the other thread I think we're already there, so I'll start taking orders for the Dual right away (see below for order info).


Quad LPG
Image
24HP, this requires 4 Thomas White LPG PCBs

This is an interest check...Quad panels will be $35USD each.
We need 10 orders to get this price. Since most people seem to be interested in the Dual, I'm not sure this one will make it, so I'm considering this an "interest check" for now. If you want one, leave a post in this thread...I'll start taking orders for it if/when we have enough takers.


Shipping Info
USPS shipping rates are going up, and the new prices will be in effect when these ship out. Shipping rates are per order, it doesn't matter how many panels you get:

U.S. - $5.35
Canada/Mexico - $12.95
All other countries - $16.95

These rates are for USPS Priority, which does not include tracking on international shipments. I've had two cases (that I am aware of) where international customers have not received their panels, and the lack of tracking has been frustrating. If you would like registered mail, tracking, or insurance let me know when you place your order and I'll get back to you with a price.


Order Info
To order send the following to me either by PM or email at clarke at muffwiggler dot com:
I'm ordering [x] pieces of the Thomas White Dual LPG panel for $xx, plus shipping, for a total of $xx.

I'm aware that I may have to pay additional amounts of customs and tax in my country.

I'm also aware that I'm only buying screened and drilled panel that may help me building an electronic module - I'm *not* buying a diy kit, not a "project" - just a screened/drilled panel. I know how to build electronic circuits and I am trained in electrical safety matters. The seller of these panels will not be held responsible for any damage that results from these panels, directly or indirectly.

My shipping address is

xxxxxx
xxxxx
xxxx
xxx

My PayPal address is xxxx@xxxx.com
My Forumname is xxxxxx
Also let me know if you'd like to add any CGS Panels to your order, or if you want to combine shipping with an order you've already placed.

When I get your order, I will reply with a Paypal invoice, due February 3, 2012. I'm shooting to place the manufacturing order on January 20, which will have me shipping these out to you around the middle of February.

Thanks, I'm looking forward to seeing your builds!
Last edited by clarke68 on Fri Jun 06, 2014 5:25 pm, edited 4 times in total.
Top
User avatar
clarke68
Making DIY modulars look cool since 2011
Posts: 1584
Joined: Wed Nov 11, 2009 2:44 am
Location: Bay Area, CA
Contact:
Contact clarke68

Post by clarke68 » Thu Jan 05, 2012 7:34 pm

Order List

50quidsoundboy - 1 dual
astroschnautzer - 1 dual (1 Quad VCA)
bensaddiction - 1 dual (1 Resonant EQ)
bkbirge - 1 dual
brother303 - 1 dual (1 tabulaRasa, 1 ResEQ)
Buckyball - 1 dual
cleaninglady - 4 duals
corex - 1 dual
Dego - 2 duals (1 tabulaRasa, 2 West Coast Mini Synth)
FingerTappin - 1 dual
frozencore - 1 dual (1 tabulaRasa)
gwaidan - 1 dual (2 tabulaRasa, 1 Mutant)
hellpony - 1 dual
hpsounds - 2 duals
hv0190 - 2 duals
J3RK - 1 dual
jbaken - 1 dual
JP - 1 dual (1 tabulaRasa)
Junk Rhythm - 2 duals
keninverse - 2 duals (1 tabulaRasa)
kollo - 2 duals (1 MSU)
koobraelc - 2 duals (1 MSU, 1 Quadslope, 1 West Coast Mini Synth)
lazerkind - 1 dual (1 Mutant)
lukas412 - 1 dual
mantiwhore - 1 dual (1 MSU, 1 West Coast Mini Synth)
modelo - 1 dual
mono-poly - 3 duals (2 tabulaRasa)
msprigings - 1 dual (1 ResEQ, 1 MSU)
nangu - 7 duals (7 tabulaRasa, 5 ResEQ)
obviousless - 2 duals
ringstone - 2 duals
regenbot - 2 duals (1 tabulaRasa, 1 Quad Slope)
richard - 1 dual (2 ResEQ, 1 Quad VCA, 1 Quad Slope)
rico loverde - 1 dual
samuraipizzacat29 - 2 duals
simfonik - 1 dual (1 tabulaRasa)
Spandex - 2 duals (1 MSU, 1 Quadslope)
tony d - 1 dual
zdarma - 1 dual
zeroseven - 2 duals

I have received payment from people in blue.
I have shipped orders to people in green.
Last edited by clarke68 on Sat Mar 24, 2012 4:23 pm, edited 65 times in total.
Top
User avatar
ringstone
antipodean experimentalist
Posts: 2789
Joined: Wed Mar 17, 2010 4:31 am
Location: Trudging through the Capital Wasteland

Post by ringstone » Thu Jan 05, 2012 7:56 pm

I'm in for two duals, thanks. My CLee panels turned up yesterday BTW, cheers mate!

Blair

EDIT: I will have a think about whether I can use any more CGS panels. Also, do you have any other panels planned for other projects?
Top
User avatar
negativspace
Manhattan Analog
Posts: 6577
Joined: Tue Apr 13, 2010 2:50 am
Location: Manhattan, KS, USA
Contact:
Contact negativspace

Post by negativspace » Thu Jan 05, 2012 8:03 pm

ringstone wrote:I'm in for two duals, thanks.
+1
Top
User avatar
brother303
Wiggling with Experience
Posts: 439
Joined: Mon Feb 15, 2010 9:01 am
Location: Ruhr-Area/Germany

Post by brother303 » Thu Jan 05, 2012 8:04 pm

Hi,
ringstone wrote:Also, do you have any other panels planned for other projects?
Tabula Rasa would be great if it happens.

Any interest in a 291-bpf panel? Maybe dual? Any other Wiggler than me interested in this?

Cheers
Greg
Peake wrote: DIY is all about the backlog. If you don't have a huge backlog, you aren't trying hard enough.
Top
User avatar
lukas412
Wiggling with Experience
Posts: 335
Joined: Wed Jan 14, 2009 10:58 am
Location: Pittsburgh, PA

Post by lukas412 » Thu Jan 05, 2012 8:11 pm

Dammit your killing me man! Ill take a dual.

thanks!
Top
User avatar
keninverse
Super Deluxe Wiggler
Posts: 1014
Joined: Mon Jul 26, 2010 4:12 pm
Location: mission control htx

Post by keninverse » Thu Jan 05, 2012 8:28 pm

I'm in for two duals at that price. If it ends up costing more then I may hop on the quad bandwagon. Also like to add these are some really slick looking panels.
Top
User avatar
clarke68
Making DIY modulars look cool since 2011
Posts: 1584
Joined: Wed Nov 11, 2009 2:44 am
Location: Bay Area, CA
Contact:
Contact clarke68

Post by clarke68 » Thu Jan 05, 2012 8:35 pm

brother303 wrote:Tabula Rasa would be great if it happens.
tabulaRasa will definitely happen, the latest version is here. I'm shooting to have that ready around the same time Greg has PCBs available. I'd love to do a 291 panel, but I'm a little backed up at the moment (plus I missed the run :bang: )...someday I hope!
lukas412 wrote:Dammit your killing me man!
My pleasure! :twisted:
Top
User avatar
tony d
Super Deluxe Wiggler
Posts: 1030
Joined: Wed Jan 14, 2009 6:02 pm
Location: boulder,co.

Post by tony d » Thu Jan 05, 2012 8:49 pm

So glad i just saw this.Pm sent and thank you very much!
Top
User avatar
negativspace
Manhattan Analog
Posts: 6577
Joined: Tue Apr 13, 2010 2:50 am
Location: Manhattan, KS, USA
Contact:
Contact negativspace

Post by negativspace » Thu Jan 05, 2012 8:51 pm

Don't forget about the Resonant EQ. 8_)
Top
User avatar
clarke68
Making DIY modulars look cool since 2011
Posts: 1584
Joined: Wed Nov 11, 2009 2:44 am
Location: Bay Area, CA
Contact:
Contact clarke68

Post by clarke68 » Thu Jan 05, 2012 8:51 pm

ringstone wrote:do you have any other panels planned for other projects?
Yup. Right now I'm actively working on panels for the tabulaRasa Wavetable Oscillator (mentioned above) and the Mutant Waveform Generator. Pretty soon I'll get going again on the Serge Resonant EQ panel that I'm doing with Negativspace, and I'd quite like to do some panels for the late Jurgen Haible's PCBs to generate some funds for his family.

edit @ negativspace - jinx!
Top
User avatar
mono-poly
Le Cheff
Posts: 5423
Joined: Fri Nov 21, 2008 3:40 pm
Location: Rotterdam, Netherlands

Post by mono-poly » Thu Jan 05, 2012 9:10 pm

2 duals please.
The farad is the captain of my print.

http://www.mono-poly.nl
http://www.noodlebar.org

WTB blue lantern purple vco
Top
User avatar
negativspace
Manhattan Analog
Posts: 6577
Joined: Tue Apr 13, 2010 2:50 am
Location: Manhattan, KS, USA
Contact:
Contact negativspace

Post by negativspace » Thu Jan 05, 2012 9:24 pm

clarke68 wrote:edit @ negativspace - jinx!
Creepy... :zombie:
Top
User avatar
simfonik
Veteran Wiggler
Posts: 542
Joined: Mon Oct 31, 2011 11:30 pm
Location: Los Angeles

Post by simfonik » Thu Jan 05, 2012 11:02 pm

email sent for 1 dual.
Top
User avatar
urbanscallywag
Ultra Wiggler
Posts: 939
Joined: Sat Sep 05, 2009 10:20 pm
Location: San Diego, CA

Post by urbanscallywag » Fri Jan 06, 2012 1:03 am

I'm interested in two duals. Are the Offset and Resonance pot drills lined up with the pads on the boards? Just want to confirm that this is how the boards are mounted to the panel.

Thanks!
Erthenvar | PulpLogic Modules | Erthenvar Modules | Euro Accessories | 1U Tiles
Top
User avatar
clarke68
Making DIY modulars look cool since 2011
Posts: 1584
Joined: Wed Nov 11, 2009 2:44 am
Location: Bay Area, CA
Contact:
Contact clarke68

Post by clarke68 » Fri Jan 06, 2012 1:41 am

urbanscallywag wrote:Are the Offset and Resonance pot drills lined up with the pads on the boards? Just want to confirm that this is how the boards are mounted to the panel.
Yup...the panel is designed to use board-mounted pots. This is my one-off version (same as the Quad), the dual is identical to the middle 2 channels:

Image

Note: I measured the above module today...the board extends 3.875 inches behind the panel. That's pretty deep for most Euro racks...make sure it fits before you order!
Last edited by clarke68 on Sun Jan 08, 2012 1:34 am, edited 1 time in total.
Top
User avatar
regenbot
Super Deluxe Wiggler
Posts: 1177
Joined: Sat Aug 21, 2010 5:59 am
Location: Finland

Post by regenbot » Fri Jan 06, 2012 1:52 am

two duals for me. pm'd for details about my order.
Top
hv0190
Common Wiggler
Posts: 188
Joined: Fri Sep 10, 2010 1:52 am
Location: Munich

Post by hv0190 » Fri Jan 06, 2012 2:32 am

+2 duals for me, please - pm on the way :hihi:
Top
User avatar
clarke68
Making DIY modulars look cool since 2011
Posts: 1584
Joined: Wed Nov 11, 2009 2:44 am
Location: Bay Area, CA
Contact:
Contact clarke68

Post by clarke68 » Fri Jan 06, 2012 2:45 am

oops
Top
User avatar
Junk Rhythm
Big Bottom Shaker
Posts: 2245
Joined: Wed Mar 11, 2009 2:16 pm
Location: Austin, TX

Post by Junk Rhythm » Fri Jan 06, 2012 3:26 am

I'll take 2 dual panels.
Top
User avatar
Thonk Support
aka Monobass
Posts: 8832
Joined: Fri May 29, 2009 5:39 pm
Location: Brighton, UK

Post by Thonk Support » Fri Jan 06, 2012 8:15 am

brother303 wrote:Any interest in a 291-bpf panel? Maybe dual? Any other Wiggler than me interested in this?
yep I'd be up for a 291 dual
Thonk - CLICK HERE - Modular Synth DIY + Eurorack Accessories Store

AS of October 2020 this account which used to go by the name of Monobass is now manned by various staff at Thonk.
Top
User avatar
urbanscallywag
Ultra Wiggler
Posts: 939
Joined: Sat Sep 05, 2009 10:20 pm
Location: San Diego, CA

Post by urbanscallywag » Fri Jan 06, 2012 10:40 am

Thanks clark, I'll send my 2x dual panel order later.
Erthenvar | PulpLogic Modules | Erthenvar Modules | Euro Accessories | 1U Tiles
Top
User avatar
Spandex
Lovely cloakroom, lovely cloaks
Posts: 245
Joined: Sun Oct 16, 2011 7:48 am
Location: Nottingham, UK

Post by Spandex » Sat Jan 07, 2012 8:35 am

I guess 2xDual makes more sense than 1xQuad yeah. I'm in for 2 duals please.
Top
User avatar
koobraelc
Common Wiggler
Posts: 206
Joined: Wed Aug 10, 2011 2:13 pm
Contact:
Contact koobraelc

Post by koobraelc » Sun Jan 08, 2012 2:47 am

Thanks Clarke!!!
Top
User avatar
clorax hurd
Notorious Frog Licker
Posts: 234
Joined: Wed Mar 09, 2011 8:34 am
Location: Novy Svet

Post by clorax hurd » Sun Jan 08, 2012 5:21 am

i'm interested in one quad. are they going to happen?
Top
Post Reply

Return to “Music Tech DIY”