MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

ADDAC203 CV Mapping
MUFF WIGGLER Forum Index -> ADDAC System  
Author ADDAC203 CV Mapping
timcoster
I just got one of these, and the knob direction on the attenuators seems to be "backwards" - so fully counter-clockwise is Max, and fully clockwise is Min.

Is this normal for this module/all ADDAC stuff? I'm finding it hard to get used to!
bj_gzp
The offset control is normal (CCW=- / CW=+)
But you are right the Attenuator is opposite to what you would expect:
Full CCW= No attenuation (Open), Full CW= fully attenuated (closed)

The early design addac modules can have some counter intuitive controls.
However André got aware of this and the recent modules have controls more the standard way.

Cheers,
BJ
ADDAC System
Hi!

The new ADDAC203 CV Mapping and ADDAC204 VC-CV Mapping Interactive User Guides can be found here:

ADDAC203 CV Mapping
ADDAC204 VC-CV Mapping

All the best,
ADDAC Team
MUFF WIGGLER Forum Index -> ADDAC System  
Page 1 of 1
Powered by phpBB © phpBB Group