Ring Mod Issue 3 "LK" Link

Discussion and support for users and builders of Oakley Sound musical products.

Moderators: Kent, Synthbuilder

Post Reply
User avatar
Learning to Wiggle
Posts: 14
Joined: Fri Sep 16, 2011 11:28 am
Location: Memphis TN

Ring Mod Issue 3 "LK" Link

Post by gtxdude » Fri Mar 09, 2012 11:02 pm

On the Ring Mod I3 PCB there is a link labeled "LK" right next to the 8 way connector to the 1/4 inch jacks. I can find no mention of it in the builders guide. Am I just missing it? Should it be jumped?

If you are the smartest person in the room, you probably need a new room.

User avatar
Super Deluxe Wiggler
Posts: 3006
Joined: Tue Mar 24, 2009 9:12 am
Location: Cumbria, UK

Re: Ring Mod Issue 3 "LK" Link

Post by Synthbuilder » Sat Mar 10, 2012 7:06 am

gtxdude wrote:Should it be jumped?
If building the modules with the MOTM format power header just ignore it.

If building the module for use in a Dotcom system you can link it out in place of linking out pins 2 and 3 of PSU. LK links out the chassis (panel) ground with the local 0V. However, the Builder's Guide, to be consistent with all the other Oakley 5U modules, tells you to link pins 2 and 3 of PSU instead.

I'll add a comment to this affect in the BG to avoid any confusion.


Post Reply

Return to “Oakley Sound Systems”