MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

[ORDER] - Euro Panels for Thomas White LPG, 2nd Run
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2, 3, 4, 5, 6, 7, 8, 9  Next [all]
Author [ORDER] - Euro Panels for Thomas White LPG, 2nd Run
clarke68
Thomas White is doing another run of this popular LPG PCBs, so I'm going to do another run of my Dual LPG panels:


12HP, this requires 2 Thomas White LPG PCBs

As before, the panels are $20USD each.

Just in case there's anyone out there who hasn't built one of these yet, this is an awesome module...an LPG is something like the west coast equivalent of a filter as far as sound-mangling is concerned, they're essential to making the classic "Buchla Bongo" percussive sound, and they double as VCAs, which (as you know) you can't have too many of. Plus, they uses exotic Vactrols, which apparently can still be found at non-exorbitant prices.

Thomas White's LPG is well documented, making this a fantastic project for a beginner (was actually my first build). There is lots of help available and, due to its versatility, it's a great module in a small "starter" system.


Shipping Info
Shipping rates are per order, it doesn't matter how many panels you get (up to a point. If you order a lot of panels I may have to send everything in a larger/more expensive box...I'll let you know):

U.S. - $5.35
Canada/Mexico - $12.95
All other countries - $16.95

These rates are for USPS Priority, which does not include tracking on international shipments. I've had a few cases where international customers shipping has been delayed, and the lack of tracking has been frustrating. If you would like registered mail, tracking, or insurance let me know when you place your order and I'll get back to you with a price.


Order Info
To order send the following to me either by PM or email at clarke at muffwiggler dot com:

Quote:
I'm ordering [x] pieces of the Thomas White Dual LPG panel for $xx, plus shipping, for a total of $xx.

I'm aware that I may have to pay additional amounts of customs and tax in my country.

I'm also aware that I'm only buying screened and drilled panel that may help me building an electronic module - I'm *not* buying a diy kit, not a "project" - just a screened/drilled panel. I know how to build electronic circuits and I am trained in electrical safety matters. The seller of these panels will not be held responsible for any damage that results from these panels, directly or indirectly.

My shipping address is

xxxxxx
xxxxx
xxxx
xxx

My PayPal address is xxxx@xxxx.com
My Forumname is xxxxxx


Also let me know if you'd like to add any other panels to your order, or if you want to combine shipping with an order you've already placed.

When I get your order, I will reply with a Paypal invoice, due May 18, 2012. I know that's soon...I'm trying to get this one going quickly so they can ship out with the other panels I'm running right now (if enough orders come in over the weekend, I'll drop the manufacturing order on Monday). I'm not trying to rush anybody...if you need more time, let me know. I don't want anybody to miss this run just because of a deadline.
clarke68
Order List

adh82 - 1 Dual LPG
anti_climacus - 1 Dual LPG
argitoth - 1 Dual LPG
asterisk - 1 Dual LPG
astroschnautzer - 3 Dual LPG
bennybones - 1 Dual LPG
bonusplays - 1 Dual LPG
chocolatyshatner - 1 Dual LPG
Dogue - 1 Dual LPG
far gon - 4 Dual LPG
humboldt - 1 Dual LPG
Junk Rhythm - 2 Dual LPG
koobraelc - 1 dual LPG
Lofi Junglist - 1 Dual LPG
loopt - 1 dual LPG
Low-Gain - 4 Dual LPG
machum - 1 Dual LPG
madcap - 1 dual LPG
mattrick - 1 Dual LPG
mckenic - 1 Dual LPG
Memory_Leak - 1 Dual LPG
microfauna - 1 Dual LPG
mOBiTh - 2 Dual LPG
muncky - 1 Dual LPG
nangu - 9 Dual LPG
negativspace - 1 Dual LPG
norbwuertz - 1 Dual LPG
NS4W - 1 Dual LPG
recompas - 1 Dual LPG
Reptil - 2 Dual LPG
ringstone - 2 Dual LPG
rowman - 1 Dual LPG
runblip - 2 Dual LPG
samuraipizzacat29 - 4 Dual LPG
smrl - 2 Dual LPG
spotta - 1 Dual LPG
Thanatronique - 1 Dual LPG
urbanscallywag - 2 Dual LPG
wwall - 2 Dual LPG
xerxl - 1 Dual LPG
xpander - 3 Dual LPG


I have received payment from the people in blue
I have shipped orders to the people in green
chocolatyshatner
One for me please!
igormpc
one for me thumbs up
wwall
I'll take two please.
thanatronique
1 panel for me, please.
mckenic
One please (and I'll up to two if we are short of the 15 hihi Dont see that happening)!

Thanks SO much for this mate!!!

Woo Hoo!!!

PS - Clarke mate - can I combine shipping with the tabulaRasa panel to save a little on shipping? Sorry if Im outta line asking here!
clarke68
mckenic wrote:
can I combine shipping with the tabulaRasa panel to save a little on shipping? Sorry if Im outta line asking here!

Absolutely. Not out of line at all...I don't make a dime from international shipping, so combining orders just means less trips to the post office for me.
runblip
one for me!
thanatronique
Hey Clarke, I noticed in the old thread the mention of the cgs mixer for the mix out and also a schematic to use without the extra mixer. Does that work? Would prefer not having to add another board.

thanks
clarke68
thanatronique wrote:
Hey Clarke, I noticed in the old thread the mention of the cgs mixer for the mix out and also a schematic to use without the extra mixer. Does that work? Would prefer not having to add another board.

Yup...it definitely works, I've been doing it since I "moved in" to the new panels. The TL074 on the PCB is a quad op-amp, and has two channels that are unused by the LPG circuit. Thomas set it up to use them as mixers for multiple audio & cv inputs, but really they can be used any way you want, since they are not connected to the LPG circuit in any way.

This is how to wire up the "Mix Out":



Msprigings posted an even fancier version here that turns the CV attenuator into an attenuverter.
clarke68
Here's how the module looks all built:





Note this is an older version of the PCB...the new one has a proper place for a Euro power connector.
mckenic
thumbs up

Thanks mate!!!

That mix out befuddled me when I read the original thread and I was just gonna leave it out this time... bloomin GREAT diagram!

So excited by this! Thank you very, very much!
thanatronique
WOW! Thanks for the explanation, great stuff. Your module looks so neat, hope mine will look 1/10th like that. lol
smrl
I'd like two!
Memory_Leak
count me in for one please hyper
bennybones
Hiya,

I'm in for one as well!
bonusplays
Thanks Clarke!

One for me I can wait on it with the rest of my order shipping wise, glad this worked out.
rowman
I'll take one thumbs up
adh82
I'll take one too!!!!!
negativspace
Such a sexy design, I'm glad you're running more. I'll take 1 this time.
clarke68
You guys make me proud...less than 24 hours after I start the thread and we have enough interest to make the run! I'll open this up to orders later on today.

Thanks! thumbs up
nickster
I'll take one too. hihi
Any chance of you doing the quad again?
Low-Gain
Put me down for 4
machum
One for me please!
MUFF WIGGLER Forum Index -> Music Tech DIY Goto page 1, 2, 3, 4, 5, 6, 7, 8, 9  Next [all]
Page 1 of 9
Powered by phpBB © phpBB Group