MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Quad AD Pot Values
MUFF WIGGLER Forum Index -> Mattson Mini Modular  
Author Quad AD Pot Values
Henfield
I am looking at getting the Quad AD/ASR Envelope Generator Board, and building into a 2 space Dotcom compatible module, but I cannot find any info on what pot values are needed. Where do I find this info and the same info for the other Mattson pre-stuffed boards?
mmm
At the top of this forum is a sticky with all of our resource links.
Hopefully, I have everything covered It's peanut butter jelly time!

The QuAD/ASR utilizes 8xA1M pots.

The parts list and where they connect to the board are found on my DIY WIKI site. It's in .pdf format for easy viewing and for printing:

http://www.mattsonminimodular.com/wiki/index.php?title=QuAD_/ASR_Envel ope_Generator_Board

All of the available DIY products follow that format and can be found in the main DIY WIKI:

http://www.mattsonminimodular.com/wiki/index.php?title=DIYcisions_DIYc isions

Just above the module information section are a couple of links to help with the wiring conventions and board sizes.

Hope this helps.

Mattson Mini Modular
Henfield
George,

Thank you for the links, I missed the "1M" for pot values! One other question, that I could not find for this module or the Quad VCA, is what is the current consumption? I am looking at using these modules in a small system with a portable power supply, so I am limited on current usage. One the Wiki pages, it says "TBD", and there isn't anything in the forum either.
mmm
Um...Um...Um...

They're on there... smile

Oops, thanks for npointing that out. Well, they're on there now It's motherfucking bacon yo


QVCA V+: 35mA
V-: 35mA
(2164's are energy hogs)

QuAD/ASR: V+: 8mA
V-: 0

So, at least the V- info for the AD1 was correct w00t
Henfield
mmm wrote:
Um...Um...Um...

They're on there... smile

Oops, thanks for npointing that out. Well, they're on there now It's motherfucking bacon yo


QVCA V+: 35mA
V-: 35mA
(2164's are energy hogs)

QuAD/ASR: V+: 8mA
V-: 0

So, at least the V- info for the AD1 was correct w00t
Only 8 mA for the QuAD/ASR? w00t w00t w00t

That makes up for the QVCA!

Thanks!!!!
mmm
Henfield wrote:
mmm wrote:
Um...Um...Um...

They're on there... smile

Oops, thanks for npointing that out. Well, they're on there now It's motherfucking bacon yo


QVCA V+: 35mA
V-: 35mA
(2164's are energy hogs)

QuAD/ASR: V+: 8mA
V-: 0

So, at least the V- info for the AD1 was correct w00t
Only 8 mA for the QuAD/ASR? w00t w00t w00t

That makes up for the QVCA!

Thanks!!!!


That's idling. It jumps up to 12mA with all four EG's at peak.

I tried it on two seperate modules and used two different meters. But, yeah.
MUFF WIGGLER Forum Index -> Mattson Mini Modular  
Page 1 of 1
Powered by phpBB © phpBB Group