MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Addac WAV 1v/oct
MUFF WIGGLER Forum Index -> ADDAC System  
Author Addac WAV 1v/oct
Alwaysnew
Is it possible to have the addac wav player react in a 1v/oct fashion? I.e. To use it as an oscillator? If so with the sample rate cv I suppose.
bj_gzp
No, the sample rate is not scaled to 1V/Oct, for both versions 101 or 111 :(
I was hoping for this in the 111, but that feature didn't made it into the final version.

But there are workarounds:
For 101+111: Use a programmer like PGM4x4 or Pressure Points to set the desired pitch and rock it from there.
For 111 only: Record different notes and put them within the first 8 samples on the card. Then play the samples using the Gate ins of the expansion module 111b.

The only Eurorack sampler tracking v/oct is the RS290. It even has a calibration mode, to calibrate it over 3 octaves to your CV keybord.

Cheers,
BJ
MUFF WIGGLER Forum Index -> ADDAC System  
Page 1 of 1
Powered by phpBB © phpBB Group