MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Difference between Plague Bearer r3 and r4
MUFF WIGGLER Forum Index -> Flight of Harmony  
Author Difference between Plague Bearer r3 and r4
mmelnick
What's the difference between the Plague Bearer r3 and r4?
sonicwarrior
From http://www.flightofharmony.com/?page_id=22

Quote:
Changes in Revision 4

Most changes in the r4 were for ease of assembly purposes, but two new features were added:
Input Attenuator: Earlier versions often required use of an external VCA to reduce input signal levels and prevent overdriving the input. This is now handled by the input attenuator.
Output limiting: The output levels of earlier versions could spike well beyond ±5Vp-p, so an output limiter was added. The limiter has a soft to medium curve and can be disabled by moving the two jumpers as shown on the PCB.


Other changes:
- Knob placement
- Gain jack multipled
- Jack placement
mmelnick
Thanks
MUFF WIGGLER Forum Index -> Flight of Harmony  
Page 1 of 1
Powered by phpBB © phpBB Group