Miniwave bank select / 5v issues

Discussion and support for Wiard Products

Moderators: Kent, grantrichter, carygrace

Post Reply
User avatar
laserpalace
Super Deluxe Wiggler
Posts: 1090
Joined: Thu Jan 14, 2010 9:51 pm
Contact:

Miniwave bank select / 5v issues

Post by laserpalace » Sun Jul 14, 2013 4:05 pm

I recently acquired a Eurofied Blacet Miniwave. There are a couple issues regarding functionality and I'm wondering if anyone else has encountered anything similar.

The first is that the bank select (manual and CV) seems to only be accessing 1/2 of the banks. Banks 0-1 are the same, 2-3, 4-5 etc. This is true for both PROM's.

The second is that when I switch from 0-10v to 5v everything seems to come to a slowed halt. It behaves erratically when in this mode, almost like there is a power drain happening.

Anyone encountered anything like this before? :despair:

Post Reply

Return to “Wiard”