MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Clock and gate signal levels
MUFF WIGGLER Forum Index -> Oakley Sound Systems  
Author Clock and gate signal levels
jbi
Tony,
What are the gate and clock levels us use on the ADSR etc ? I'm finishing an MFOS sequencer that generates ground to +15V levels. Just want to make sure I don't need to change the output levels so I don't blow anything up :-(
John
Synthbuilder
jbi wrote:
What are the gate and clock levels us use on the ADSR etc?

Anything over 2V. So 15V is fine.

Tony
jbi
Thanks Tony
MUFF WIGGLER Forum Index -> Oakley Sound Systems  
Page 1 of 1
Powered by phpBB © phpBB Group