MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Program with three clock dividers for the Ardcore Expander
MUFF WIGGLER Forum Index -> SNAZZY FX  
Author Program with three clock dividers for the Ardcore Expander
Alwaysnew
This is my first version of a compound clock divider sketch for the expander:

https://github.com/Magnus-G/Ardcore/blob/master/Clocks

Feed a clock in "Clock in" and set A0 to select one of these programs:

Cycle Program
-----------------
Stepping through 0-7 outputs with a trigger on each clock in.
Set A0 to full CCW.

Halves Program
------------------
Clock goes out each time on output 0, every second time on 1, every fourth time on 2 and so on.
Set A0 to noon.

Divider Program
-------------------
Clock goes out each time on output 0, every second time on 1, every third time on 2 and so on.
Set A0 to full CW.

Drum Program
-----------------
Inspired by Grids by Mutable Instruments

There is a 1 second signal as the program is changed.

Any comments or feedback is welcome!
Alwaysnew
Now updated with probability control on A2!
Alwaysnew
And now updated with internal clock if A1 is not fully CCW (it then only reacts on "Clock In" trigging)
pulsewidth
I just received my Ardcore expander today and loaded this sketch. This is fantastic. The perfect companion to my Rene! Thank you for this!
Alwaysnew
Thanks! I have now updated it to contain a fourth program that produces drum patterns (a bit like Grids but with 8 outputs). Take a look at the code and add your own patterns in the drum matrixes. Let me know if it's useful and I'd love to create a drum pattern library so upload yours!

(New link to code above)
makaton
Thank You.
MUFF WIGGLER Forum Index -> SNAZZY FX  
Page 1 of 1
Powered by phpBB © phpBB Group