MUFF WIGGLER Forum Index
 FAQ & Terms of UseFAQ & Terms Of Use   Wiggler RadioMW Radio   Muff Wiggler TwitterTwitter   Support the site @ PatreonPatreon 
 SearchSearch   RegisterSign up   Log inLog in 
WIGGLING 'LITE' IN GUEST MODE

Metasonix, Please make a...
MUFF WIGGLER Forum Index -> Metasonix Goto page 1, 2, 3  Next [all]
Author Metasonix, Please make a...
Smokey
Auto Wah / Envelope Filter Bass Pedal

I'd love a nasty envelope following filter to make some horrible noise-funk... the kinda music they might put in an S&M movie right before she says the safeword.

Like a Q-tron or Mutron but from hell. Flamey



For everyone else, what would you like to see a Metasonix version of?
burnn_out!
Assblaster Metasonix!
Smokey
burnn_out! wrote:
Assblaster Metasonix!


Wow. I missed that the Assblaster had an Envelope following feature.

That said... I'd still love a dedicated pedal (to put on the floor, not in an utility box) that exploits that Envelope following / Auto Filter / auto-wah effect.
Mat
I agree with Smokey! more toys for bass guitar!!!

I use the TX-3 with a Bass Jazz (passive) but just for drones, if you want to use it as bass distortion you will hear about 30% of the tones and 70% of noise, which is good if you like hard noise.

For drones I use the CV input, you can control the TX-3 from the knobs of your bass! very funny.

Bass > (CV input) TX-3 > Delay:

Check at 1:43 and 3:59:

[url=https://soundcloud.com/laconfederacion/deben-rodar-cabezas-1]http s://soundcloud.com/laconfederacion/deben-rodar-cabezas-1[/url]

[s]http://soundcloud.com/laconfederacion/deben-rodar-cabezas-1[/s]


Same song (Live):
Using Aguilar DB 751 Amp and 2 x DB 212:
[url=http://soundcloud.com/rocksonora/la_confederacion-vivo]http://sou ndcloud.com/rocksonora/la_confederacion-vivo[/url]

[s]http://soundcloud.com/rocksonora/la_confederacion-vivo[/s]
Villarceau
La cabeza del guitarrista tiene que rodar IMHO.
Otherwise very enjoyable stuff and really digged the squirting bass with TX-3.
ectoplasm
Realistic piano/Fender Rhodes sounds.
metasonix
Mat wrote:
https://soundcloud.com/laconfederacion/deben-rodar-cabezas-1

Very good--I didn't know it would do that.
Smokey
Mat wrote:


For drones I use the CV input, you can control the TX-3 from the knobs of your bass! very funny.



Great tip that also works with a bass and the F-1 pedal. You can use the knobs to tune the feedback! Or is it the "parasitic oscillations"? Very, very fun and funny!

Thanks for sharing the tunes Mat. That TX-3 is a howling banshee!
wavecircle
I'd like a metasonix pony. Just sayin'.
metasonix
beyourdog
Tube dildo/strap that vibrates according to Control voltage from another source synth...
My analblasster made me sing like a bitch last night...
o-live
hihi


Make a delay !!!!
FatRocky
6 channel tube mixer/preamp with cv control on levels
Guest
Please not the reissue of the PT2 since I'm one of the 12 owners of this crazy synth smile
o-live
6/6/6

6 tube mixer / 6 filter-reverb /6 Comp-limiter

Dead Banana
FatRocky
please make a Wretch mini in a small grey toolbox
Smokey
please make a Nixie tube alarm clock that can unleash a horrible "wake up" noise...

I don't wanna be late for work again due to late night Wretching Dead Banana
FatRocky
dual channel assblaster in a rack
QuantumMechanakillWave
A krytron based oscillator with the addition of a noise source that is a crude beta particle detector housed near the krytron. hihi
malnatim
an R-module phaser / all-pass filter please.

i love my effectrode phasers. they're very polite. i'm sure a metasonix take on a phaser would be a completely different + ruder beast.

maybe, could be another "supermodule vco/vcf".
metasonix
malnatim wrote:
an R-module phaser / all-pass filter please.

Could, but it would require several tubes and cost close to $1000.

Quote:
i love my effectrode phasers. they're very polite.

That's because they are very simple, to keep costs down. There's only so much you can do with three dual triodes. A really good phaser would have at least seven or eight stages.
mecanikill
metasonix wrote:
malnatim wrote:
an R-module phaser / all-pass filter please.

Could, but it would require several tubes and cost close to $1000.

I would buy one!
Golgo44
Delay, phaser, new filter, compressor, and a chaos type lfo I would be interested in. love
slow_riot
Van Der Pol filter/distortion/oscillator
malnatim
metasonix wrote:
malnatim wrote:
an R-module phaser / all-pass filter please.

Could, but it would require several tubes and cost close to $1000.


yeah, that probably wouldn't work for the euro market. imo the R-modules are at a good price point.

shame, it'd be great to hear the metasonix take on a phaser.

maybe it could work as another tool-box design for the metasonix fanatics who can/will pay?
MUFF WIGGLER Forum Index -> Metasonix Goto page 1, 2, 3  Next [all]
Page 1 of 3
Powered by phpBB © phpBB Group